PFS IC Duct work good with Greddy SMIC?
#1
no more problems, PLEASE!
Thread Starter
Join Date: Jan 2003
Location: Bay Area, CA
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
PFS IC Duct work good with Greddy SMIC?
Has anyone tried this setup?
I have a small gap between my Greddy SMIC and I really want to fix it. It's pretty absurd to think Greddy would charge $1200-$1500 for an intercooler kit with such sh*tty "ducting". Those aluminum plates don't do anything in my opinion.
I just visited Peter Ferrell's site and they have a price list that states the standard intercooler ducting is $150. M2 won't sell just the ducting to me. I don't think Pettit sells just the ducting either, but correct me if I'm wrong. If Pettit does sell the duct, would it be better than the PFS duct?
What do you guys think? I know there'll be some trimming involved. I'm curious about how the install/fitment on the duct was and how well it will cover all the fins on the Greddy SMIC.
I have a small gap between my Greddy SMIC and I really want to fix it. It's pretty absurd to think Greddy would charge $1200-$1500 for an intercooler kit with such sh*tty "ducting". Those aluminum plates don't do anything in my opinion.
I just visited Peter Ferrell's site and they have a price list that states the standard intercooler ducting is $150. M2 won't sell just the ducting to me. I don't think Pettit sells just the ducting either, but correct me if I'm wrong. If Pettit does sell the duct, would it be better than the PFS duct?
What do you guys think? I know there'll be some trimming involved. I'm curious about how the install/fitment on the duct was and how well it will cover all the fins on the Greddy SMIC.
#2
Yes it is for sale.
Join Date: Aug 2002
Location: The Houston Club's Resident Lush.
Posts: 1,905
Likes: 0
Received 1 Like
on
1 Post
look at this site for an option.
http://www.rx7turboturbo.com/robrobinette/ic_duct.htm
You may also want to get some heat tape from Home Depot to tape the duct to the intercooler for better air sealing.
http://www.rx7turboturbo.com/robrobinette/ic_duct.htm
You may also want to get some heat tape from Home Depot to tape the duct to the intercooler for better air sealing.
Last edited by FormerPorscheGuy; 04-25-04 at 01:09 PM.
#3
no more problems, PLEASE!
Thread Starter
Join Date: Jan 2003
Location: Bay Area, CA
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by FormerPorscheGuy
ook at this ite for an option.
http://www.rx7turboturbo.com/robrobinette/ic_duct.htm
You may also want to get some hat tape from Home Depot to tape the duct to the intercooler for better air sealing.
ook at this ite for an option.
http://www.rx7turboturbo.com/robrobinette/ic_duct.htm
You may also want to get some hat tape from Home Depot to tape the duct to the intercooler for better air sealing.
Is the PFS Duct and the Pettit Cool Charge II Duct the same? If they aren't then it only gives me a small idea of what to expect. Does Pettit sell their IC ducts alone? If so, I guess I'd be all set. Otherwise, the PFS duct would be my only option left.
#4
call me Smokie Smokerson
Join Date: Aug 2002
Location: Southern California
Posts: 1,665
Likes: 0
Received 0 Likes
on
0 Posts
Pettit doesn't have the Coolcharge 2 duct any more. I called them up to buy one ~ 3 months ago, and they were searching everywhere for a used one w/no luck.
I believe Batman made his own with some sheets of metal & heavy duty velcro
I believe Batman made his own with some sheets of metal & heavy duty velcro
#5
no more problems, PLEASE!
Thread Starter
Join Date: Jan 2003
Location: Bay Area, CA
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by r0t0r-rooter
Pettit doesn't have the Coolcharge 2 duct any more. I called them up to buy one ~ 3 months ago, and they were searching everywhere for a used one w/no luck.
Pettit doesn't have the Coolcharge 2 duct any more. I called them up to buy one ~ 3 months ago, and they were searching everywhere for a used one w/no luck.
#6
no more problems, PLEASE!
Thread Starter
Join Date: Jan 2003
Location: Bay Area, CA
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by r0t0r-rooter
I believe Batman made his own with some sheets of metal & heavy duty velcro
I believe Batman made his own with some sheets of metal & heavy duty velcro
Trending Topics
#8
Rotary Enthusiast
I put a pettic duct on my greddy smic .... those tripoint pics sold me on the greddy. Duct was a PIA, unless u have losts of time to piddle away.
there's enough greddy smic's out ther, RP or rxstore should consider getting a fiberglass boat shop to slap some direct fit greddy ducts. sign me up for one.
there's enough greddy smic's out ther, RP or rxstore should consider getting a fiberglass boat shop to slap some direct fit greddy ducts. sign me up for one.
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM