3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

PFC questions

Thread Tools
 
Search this Thread
 
Old Jul 29, 2006 | 06:24 PM
  #1  
FD'up's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 83
Likes: 0
From: GA
PFC questions

I am looking at purchasing an apexi power FC with the commander. Here are the mods I got right now:
Bonez downpipe
high flow cat
racing beat exhaust
pettit air intake
manual boost contoller
aluminum AST
boost gauge and temp gauge
I got a flidyne radiator coming

So I am wondering what fuel mods I would need with the power FC. The car is a daily driven street car. Am i ready for bigger injectores and a walbro?

Also with the PFC do i need a boost controller or does it handle that?
Reply
Old Jul 29, 2006 | 08:43 PM
  #2  
books's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Mar 2002
Posts: 1,751
Likes: 46
From: St. Louis
There may be more info in the PFC section of the forum.

Fuel is relative to boost level, and without an upgraded intercooler I am not certain what boost level you will be running.

There are differing views on whether fuel upgrades are needed up to 15
psi or so. Some do not like to run over 85% injector duty cycles.

The PFC does control boost, some individuals have success using it others have not.

Here are some numbers from an old log, at approximately 13 psi, 11.6 AFRs, and 7,2xx rpms my duty cycles were about 87%.

Last edited by books; Jul 29, 2006 at 08:49 PM. Reason: edit
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
msilvia
3rd Generation Specific (1993-2002)
15
Sep 11, 2015 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 11:54 PM.