Pettit downpipe threads
#1
Killer Turbo Twins
Thread Starter
Join Date: Sep 2001
Location: Prairie Village, Kansas
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Pettit downpipe threads
Since the pettit dp was installed on my 3rd gen the pipe has been leaking because one of the bolts was not put in. I need to fix this problem to stop the leak from putting echaust into my A/C and to make the car sound normal. What are the thread sizes of the Pettit dp on the front where the pipe attaches to the manifold? Thanks.
#2
Eats, Sleeps, Dreams Rotary
The downpipe doesn't have threads. I have the Pettit DP and it just has 4 holes for the 4 studs coming off the manifold...the thread sizes of the studs? dunno...is that what you are talking about?
#3
Killer Turbo Twins
Thread Starter
Join Date: Sep 2001
Location: Prairie Village, Kansas
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
The studs i guess. The problem is the weld on the front is so large the head wont stay. I gotta shave it down and then put in another where we didn't put it in. Anyone have the size?
#4
Rotary Freak
iTrader: (8)
this is the harware I used to install mine:
Three 1" long 10mm diameter stainless steel bolts and 1 allen head bolt (10mm thread) with lock washers.
I used a 17mm socket on the bolts and a 8mm allen on the allen.
The allen head was used in the spot you are having difficulty with.
Please remember to check the length/threads for proper fitment.
Three 1" long 10mm diameter stainless steel bolts and 1 allen head bolt (10mm thread) with lock washers.
I used a 17mm socket on the bolts and a 8mm allen on the allen.
The allen head was used in the spot you are having difficulty with.
Please remember to check the length/threads for proper fitment.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM