part numbers please help..
#4
Senior Member
Thread Starter
Join Date: Aug 2006
Location: next door
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
are these the correct part numbers for track rod ends [steer rack]and door handle p/s. 32-2805 and 75950..just incase im not looking at it right..thanks in advanced all.
#5
Moderator
iTrader: (7)
Nope. Offhand those look like position codes. To the right of the illustration you'll see the list of position codes and the actual part numbers.
Did you follow this procedure?
https://www.rx7club.com/showthread.p...71#post6546571
Did you follow this procedure?
https://www.rx7club.com/showthread.p...71#post6546571
#6
Senior Member
Thread Starter
Join Date: Aug 2006
Location: next door
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the reply.thats a good link thanks. but as u said some of the print is hard to read like the, track rod ends/seal dust ball joint location 32-279 last digit is not clear...# b455 32 27.... 0 or 9 maybe??? and the p/s doorhandle/handle L [out] has two numbers #fd01 59 410 an[fdo1 59 4108] is the one in brackets the d/s part number?thanks so muck for ur help...
#7
Civilization is crumblin
iTrader: (3)
Join Date: Nov 2004
Location: eL lAY
Posts: 2,279
Likes: 0
Received 0 Likes
on
0 Posts
Left Door Handle - Fd15-59-410D
Fd15-59-410C
Right Door Handle - Fd15-58-410D
Fd15-58-410D
Not sure the difference between the C and the D on the door handles.
Mazda sells the tie rod ends with dust cover, nut, and pin
PN- 8AB2-32-280
Fd15-59-410C
Right Door Handle - Fd15-58-410D
Fd15-58-410D
Not sure the difference between the C and the D on the door handles.
Mazda sells the tie rod ends with dust cover, nut, and pin
PN- 8AB2-32-280
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM