3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

part number for EU Spec rear fog light

Thread Tools
 
Search this Thread
 
Old Apr 19, 2025 | 05:01 AM
  #1  
nawop's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2018
Posts: 44
Likes: 2
From: Luxembourg
part number for EU Spec rear fog light

Hello,

I’ve been searching online for quite some time but haven’t had any luck so far. I am currently in the process of registering my imported vehicle here in Luxembourg, and as part of the legal requirements, I need to install a rear fog light. The FD was originally sold here with the required rear fog light, so there should be an OEM version of the fog light available. However, I’m not sure what the exact part looks like or how to go about finding it.

My main challenge is that the fog light needs to be installed on the left-hand side of the vehicle, but most of the results I’ve found either show aftermarket kits or fog lights intended for right-hand drive vehicles.

Any assistance or advice would be greatly appreciated. It would be even better if someone happens to have one for sale.

Thank you in advance!
Reply
Old Apr 19, 2025 | 09:27 AM
  #2  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,837
Likes: 3,233
From: https://www2.mazda.com/en/100th/
they go on either side of the license plate, FD11-51-660B or D for the left and FD12-51-650B or D
the bumper cover is different too, to hold the lights FD11-50-221B
all of this looks to be NLA in Japan, but maybe its not in the EU



Reply
Old Apr 19, 2025 | 10:28 AM
  #3  
Zepticon's Avatar
OEM+
Tenured Member: 10 Years
iTrader: (2)
 
Joined: Jul 2012
Posts: 1,012
Likes: 675
From: Norway
This also require the rare euro-spec rear bumper. I would rather attempt to make something in the marking lights on the side of the plate.
Reply
Old Apr 19, 2025 | 02:48 PM
  #4  
billyboy's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Jun 2005
Posts: 1,677
Likes: 287
From: sydney
Fitted to Au and I imagine, UK spec cars too, you're out of luck if trying for new
Reply
Old Apr 21, 2025 | 02:21 AM
  #5  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,024
Likes: 1,680
From: B.C.
Guy in Greece was parting one out a while back.
Reply
Old Apr 21, 2025 | 08:47 AM
  #6  
jza80's Avatar
Rotary Enthusiast
Tenured Member: 10 Years
Liked
Loved
Community Favorite
iTrader: (32)
 
Joined: Nov 2011
Posts: 842
Likes: 115
From: South Orange County, CA
Could one of the two inner tail/stop lamp elements be converted to operate as the fog lamp?

I understand wanting to use the original EU spec parts for the style factor though..

Last edited by jza80; Apr 21, 2025 at 08:49 AM.
Reply
Old Apr 21, 2025 | 11:06 AM
  #7  
nawop's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2018
Posts: 44
Likes: 2
From: Luxembourg
Thanks everyone for your help
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BanzaiBoogie
NW RX-7 Forum
4
Aug 5, 2014 03:57 AM
adoh30
3rd Generation Specific (1993-2002)
5
Jul 3, 2006 02:12 AM
ccw998
Interior / Exterior / Audio
5
Jul 26, 2004 06:30 AM
rybrx7
3rd Generation Specific (1993-2002)
27
Apr 18, 2003 06:17 AM




All times are GMT -5. The time now is 11:05 AM.