Parking brake cable stretched too far ?
#1
Parking brake cable stretched too far ?
Hi All,
My 7's parking brake stopped functioning so decided to remove the center console and play with the adjustment screw.
But well, it made no sense - pulled the cable several inches by hand easily. Is there an "easy" way to identify what's wrong or figure if I need a new cable? Any advice?
Thanks!
My 7's parking brake stopped functioning so decided to remove the center console and play with the adjustment screw.
But well, it made no sense - pulled the cable several inches by hand easily. Is there an "easy" way to identify what's wrong or figure if I need a new cable? Any advice?
Thanks!
#2
Lousy Crew Chief
iTrader: (10)
Did it just suddenly lose all tension when you pulled it one day? You could have a broken cable. If you block the front wheels and jack up the rear, you can look at the caliper brake arm and watch for movement while someone pulls the e brake. Otherwise if it gradually got looser, I would imagine it's just out of adjustment.
Matt
Matt
Thread
Thread Starter
Forum
Replies
Last Post
Ham1985rx7
1st Generation Specific (1979-1985)
2
02-20-20 09:18 AM
KompressorLOgic
2nd Generation Specific (1986-1992)
16
05-20-16 07:13 PM