What line goes where on the actual pump?

Does the line going to the rear housing connect to the top or the bottom of the OMP?

(obviously, if I know this I can work out the other one. )


Another question, one line broke and I was going to use small diameter Diesel injector leak off pipe. Suitable to diesel, leaded and unleaded fuel.

Curious if this would be ok for oil to run through it?

thanks in advance!!

 

You may want to check out the OMP rebuild section in the 2nd Gen archive:
https://www.rx7club.com/2nd-gen-archive-72/rebuilding-omp-oil-injection-lines-348068/

It won't answer which line goes where, but it does have some parts info for replacing the lines.

The attached page from the FSM shows the oil meter line routing.

This is page D-2.

 

Cheers mate.

I've found some hose that should do the job.

 

Put it together the way the lines lay the best ,with out any stress ,least amount of bending .Life can be easy if you let it .