Oil pressure & temp
06-26-04, 12:24 AM
#1
Rotary on a budget
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Austin, Tx
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Oil pressure & temp
Im hopefully about to be installing two new gauges into my Rx..
A oil temp and oil pressure gauge.
where have yall mounted the sending units..
they are for Defi D-gauges if anyone wants to know..
and what are consider normal temp & pressure ranges for these gauges?
thanks
MrRx.
A oil temp and oil pressure gauge.
where have yall mounted the sending units..
they are for Defi D-gauges if anyone wants to know..
and what are consider normal temp & pressure ranges for these gauges?
thanks
MrRx.
06-26-04, 02:27 AM
#3
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Greddy adaptor is best and cleanest solution.
Normal oil pressure is 50+ at 3k rpm and going toward 120 psi at redline. Oil temps are very dependent on your oil cooling setup and ambient temps.
Normal oil pressure is 50+ at 3k rpm and going toward 120 psi at redline. Oil temps are very dependent on your oil cooling setup and ambient temps.
Thread
Thread Starter
Forum
Replies
Last Post