3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

oil leak

Thread Tools
 
Search this Thread
 
Old Feb 9, 2006 | 04:11 PM
  #1  
scotto's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 14
Likes: 0
From: uk
oil leak

wondering if there are any common oil leaks on fd3's as mine has oil running down the edge of the gearbox and dripping on the subframe.its not a big leak,i clean it up as much as i can and a few weeks later there will be a few drops on my drive.It seems to be coming down around where the turbo return pipe goes into the block.i thought it was coming from the return pipe but have replaced the gaskets and the pipe is fine so it must be somewher a bit higher than that...any ideas?
Reply
Old Feb 9, 2006 | 05:08 PM
  #2  
REAmemiya FD3S's Avatar
Banned. I got OWNED!!!
 
Joined: Oct 2003
Posts: 677
Likes: 0
From: NJ
Oil pan leaks and Front Cover leaks are common in FDs. i'm in the process of fixing my front cover leak. It's fairly easy if you pull the engine.
Reply
Old Feb 9, 2006 | 05:12 PM
  #3  
jd to rescue's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (3)
 
Joined: Apr 2003
Posts: 542
Likes: 1
From: scottsdale, az
Did you replace the gaskets on both return pipes at both ends? There are a total of four gaskets that conceivably could be involved. If so, check the oil feed line banjo fittings on the "top" side (more around on passenger side) of the turbos and at the main feed coupling beneath the air pump.

Last edited by jd to rescue; Feb 9, 2006 at 05:18 PM.
Reply
Old Feb 12, 2006 | 08:18 AM
  #4  
scotto's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 14
Likes: 0
From: uk
only replaced 2 gaskets...one on either end of the 90 degree bent pipe from lowest turbo to block.so there are 2 return pipes?is one above the other?will need to get a look under it again and get it all cleaned up to see properly
Reply
Old Feb 12, 2006 | 08:25 AM
  #5  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by scotto
only replaced 2 gaskets...one on either end of the 90 degree bent pipe from lowest turbo to block.so there are 2 return pipes?is one above the other?will need to get a look under it again and get it all cleaned up to see properly
Yes, there is one where the return line attaches to the turbos and one where it attaches the block.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM
sypath
3rd Generation Specific (1993-2002)
2
Aug 16, 2015 12:06 AM




All times are GMT -5. The time now is 05:26 PM.