Oil catch cans.
#1
Oil catch cans.
Anyone who has aftermarket catch tanks/cans please post pictures of your mounting points. I am planning on ordering the cusco catch can in the next few days. I believe it comes with it's own mounting bracket. Does anyone have pictures of the cusco one as well??
Thanks.
Thanks.
#3
Rotary Freak
Garfinkle made Roterbrain one, the rear of the 4inch tube is a catch can , the front of the tube holds 2 cycle oil for the oil metering pump. The unit is bolted where the air pump was. The filler cap is from the oil fill tube off a first gen, so the screw on caps match .One unit ,two problems solved, in one space .
#4
Lives on the Forum
They can be a pain in the ****, since you have to crawl underneath the car after 10 laps to drain the damned thing. From a convenience standpoint, it's better to leave the oil ventillation system the way it is (PCV to intake when motor is @ vacuum to atmospheric pressure; from filler neck to primary turbo when motor is under boost pressure). I converted mine back to stock oil ventilation, cuz I got sick of draining the catch can. I figure there's no real harm in oiling the turbo and motor...it's the poor man's oil metering afterall (according to DamonB LOL )
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM