OEM mudguards
#56
Full Member
#57
Thanks for the response 'Lupin'.....What dealer did you buy them from?.......I'm waiting for a response from 'Real Mazda Parts'....They list FD01-V3-450G NU....at $73 not sure if that's both sides. Another online dealer listed them at $73....but when I put the part in the 'cart' the price doubled.. The rears came in one box listed as FD01-V3-460G NU...I bought them off ebay for $124 delivered.
#59
Full Member
Sorry to hear that it is no longer available. I checked my receipts and I bought from Mazda-parts. $73.66 for each pair. I buy from them whenever I have stuff that I might want to pick up, otherwise I buy from Ray.
The following users liked this post:
Greg Sabol (02-01-21)
The following users liked this post:
Greg Sabol (02-01-21)
#61
Thanks again Lupin.....I placed an order with Mazda Parts...(CardinaleWay Mazda Las Vegas)....They're expecting some more in....The other places I've tried just say they're discontinued and can't get them anymore...Fringes crossed they can sill get them!
#62
#63
RX-7 Bad Ass
iTrader: (55)
I would also check with Ray Crowe. He can give a 100% answer on availability. If it can be found, he can find it.
Dale
Dale
The following users liked this post:
Greg Sabol (02-02-21)
#66
Lives on the Forum
iTrader: (26)
For art's sake
Why would you need and FD in order to buy Mud Flaps. Do you need to have a wall to buy a van Gogh?
Goodfella, are you going to tell us your price?
Generally you have to keep you eye peeled for when a set of flaps gets too close to the shore. Cast you net, even if they are marked up, that is usually underneath where no one looks (often). . Besides you can swap them out when a better set drifts to shore. (Or you take the leap to OEM sideskirts, as you will, eventually).
Goodfella, are you going to tell us your price?
Generally you have to keep you eye peeled for when a set of flaps gets too close to the shore. Cast you net, even if they are marked up, that is usually underneath where no one looks (often). . Besides you can swap them out when a better set drifts to shore. (Or you take the leap to OEM sideskirts, as you will, eventually).
Last edited by Redbul; 05-04-21 at 12:52 AM. Reason: Add superflous comments.
The following 2 users liked this post by Redbul:
c0rbin9 (05-05-21),
Greg Sabol (05-04-21)
The following users liked this post:
c0rbin9 (05-05-21)
#70
Lives on the Forum
iTrader: (26)
Van Gogh or go!
Parts for parts sake, actually.
Sad to say, those flaps have since been re-released into the wild (except the original white breading pair).
But there is always the next project.
I think a genuine original paint 94CW bumper would look particularly fine above the living room fireplace.
This one still has the original inspectors signature on the reverse. Priceless!
{Note: Still intact paper part number! Rare! Impossible to find!]
Sad to say, those flaps have since been re-released into the wild (except the original white breading pair).
But there is always the next project.
I think a genuine original paint 94CW bumper would look particularly fine above the living room fireplace.
This one still has the original inspectors signature on the reverse. Priceless!
{Note: Still intact paper part number! Rare! Impossible to find!]
Last edited by Redbul; 05-07-21 at 11:44 AM. Reason: added info.
The following users liked this post:
Greg Sabol (05-08-21)
#71
Junior Member
Join Date: Mar 2018
Location: North Carolina
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
OEM mudguards
If this thread is still active, I have a full set of flaps I want to sell. I debated if I wanted to run them and decided against it. They were originally VR and painted black at some point.
Last edited by Buttafingers7; 08-04-21 at 04:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hhxobey
2nd Generation Non-Technical and pictures
63
04-13-17 12:27 PM
funnyscreenname
3rd Generation Specific (1993-2002)
2
12-07-12 11:15 PM
gilmore03
1st Generation Specific (1979-1985)
8
01-06-06 02:25 AM
EatRiceDontDriveIt
2nd Generation Specific (1986-1992)
10
03-02-04 04:46 PM