3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Odd coolant leak... Outer O-rings?

Thread Tools
 
Search this Thread
 
Old Sep 14, 2013 | 12:24 PM
  #1  
7-sins's Avatar
Thread Starter
thats not paint....
Tenured Member 20 Years
 
Joined: May 2001
Posts: 2,231
Likes: 2
From: Manassas, VA
Odd coolant leak... Outer O-rings?



Smelling coolant in the engine bay, I poked around and noticed this last night. Wiped it dry and the puddle came back overnight. Single turbo setup, no coolant lines around that side of the engine (rear iron). Both water lines to the turbo are dry. Running Evans NPG+ with a 7psi cap, got a spare cap and going to try 0psi. Hoping less pressure and a few heat cycles will clear it up.

From what I read outer water jackets rarely go bad, the motor has very low miles on it <10k.
Reply
Old Sep 14, 2013 | 05:24 PM
  #2  
Fd3BOOST's Avatar
Recovering Milkaholic
iTrader: (7)
 
Joined: Jan 2002
Posts: 8,206
Likes: 0
From: Budds Creek, Maryland
Could pull motor and re-torque the engine bolts. Not that it's what you want to hear.
Reply
Old Sep 14, 2013 | 08:30 PM
  #3  
K-Tune's Avatar
FD Daily
Tenured Member: 20 Years
iTrader: (27)
 
Joined: Jul 2003
Posts: 3,308
Likes: 14
From: Gulf Breeze, FL
Does any coolant come out of the exhaust? Have seen corrosion allow coolant into the exhaust ports.
Reply
Old Sep 16, 2013 | 08:32 AM
  #4  
7-sins's Avatar
Thread Starter
thats not paint....
Tenured Member 20 Years
 
Joined: May 2001
Posts: 2,231
Likes: 2
From: Manassas, VA
Looks like the first picture link broke....


No coolant out of the exhaust from what I can tell; no white smoke, no sweet smell out of the exhaust.

Dave, that sound like a smart option... should I remove & reinstall the engine.

Over 2 days sitting, it made a 3" wide puddle underneath the car... drove it 10 miles last night with the 0psi cap & it seemed to dry up.... monitoring closely to see how much it weeps/if it comes back
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Group Buy & Product Dev. FD RX-7
8
Oct 4, 2015 06:07 PM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM




All times are GMT -5. The time now is 08:49 PM.