3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Norwegian FD project.. lots of pics.

Thread Tools
 
Search this Thread
 
Old Jan 7, 2010 | 10:37 PM
  #701  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Thanx guys..

Well I didnt find a dash, hade to get one made..


I have to go to work a couple of days, some extra work..

Then I`m going to work on the car the rest of this weekend..
Reply
Old Jan 17, 2010 | 07:49 AM
  #702  
ARMAN's Avatar
WOTCOP
Tenured Member 20 Years
 
Joined: Sep 2004
Posts: 109
Likes: 0
From: Melbourne
hey mate do you have blue prints for the cage setup?
Reply
Old Jan 17, 2010 | 10:17 AM
  #703  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Originally Posted by ARMAN
hey mate do you have blue prints for the cage setup?
Sorry no blue prints on the cage, it`s a custom made cage.
Reply
Old Jan 19, 2010 | 12:02 PM
  #704  
Force13B's Avatar
No more G6
Tenured Member: 20 Years
iTrader: (19)
 
Joined: May 2005
Posts: 1,935
Likes: 1
From: Nipomo, California
Reply
Old Jan 19, 2010 | 07:36 PM
  #705  
dagoof's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2010
Posts: 143
Likes: 6
From: Idaho
Just read this entire thread.

Wow

Just Wow.
Reply
Old Jan 22, 2010 | 08:39 PM
  #706  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Does anyone have any inputs on a mechanical fuel pump and FRP?

Need a fuel pump that can flow 700l/h at 8bar, and a frp that can handle that flow.

Have heard that the Aeromotive pumps are prone to leak after a short time.

Also need to handle E85 fuel..
Reply
Old Jan 23, 2010 | 09:59 AM
  #707  
Vell's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2008
Posts: 213
Likes: 0
From: Rennes, Britanny - France
Some 044 can handle that For the FPR, I don't know.
(I have read the same about Aeromotive pumps)
Reply
Old Jan 23, 2010 | 02:26 PM
  #708  
22GoinOn2's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jun 2004
Posts: 97
Likes: 0
From: Florida
My Aeromotive A1000 doesn't leak at all. I guess I got lucky. Bosch 044s and Walbro 255s are popular choices. 044s are nicer, but cost a lil bit more; while the 255s are very affordable, yet somewhat noisy. IDR if they are alcohol compatible though. Plus you would probably need to run more than one to get enough fuel on alcohol.
Reply
Old Jan 23, 2010 | 03:42 PM
  #709  
mad20b's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 203
Likes: 0
From: New Zealand
044 is electric & 200 L Hr at 5 Bar.... He has asked for 700 L/ Hr Mechanical pump! SO thats about 2500 HP on petrol. I would look at the Magnafuel Pumps, although the Aeromotive is the most popular choice for most.
Reply
Old Jan 25, 2010 | 06:41 PM
  #710  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Originally Posted by mad20b
044 is electric & 200 L Hr at 5 Bar.... He has asked for 700 L/ Hr Mechanical pump! SO thats about 2500 HP on petrol. I would look at the Magnafuel Pumps, although the Aeromotive is the most popular choice for most.

Ok thanx.

Will look into the magnafuel pumps.
Reply
Old Jan 29, 2010 | 12:59 AM
  #711  
lzamboni's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (8)
 
Joined: Feb 2007
Posts: 374
Likes: 0
From: Seattle, Washington
The Aeromotive pumps are good ones but if you are going to use them, make sure you get one of their pump controllers since I have read that they tend to burn up if used a lot without it.
Leo
Reply
Old Jan 29, 2010 | 01:04 AM
  #712  
lzamboni's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (8)
 
Joined: Feb 2007
Posts: 374
Likes: 0
From: Seattle, Washington
And by the way, my car makes a little less than 500 whp and I am using a dual Supra pump (denso) system because I started running out of fuel when running 1 pump alone at 18 PSI and the Denso flows a little more than the walbro, so with your setup you will not be able to use the Walbro or the Denso, maybe not even the bosch 044 unless you use more than 2.
Reply
Old Jan 29, 2010 | 01:40 AM
  #713  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Originally Posted by lzamboni
And by the way, my car makes a little less than 500 whp and I am using a dual Supra pump (denso) system because I started running out of fuel when running 1 pump alone at 18 PSI and the Denso flows a little more than the walbro, so with your setup you will not be able to use the Walbro or the Denso, maybe not even the bosch 044 unless you use more than 2.


I have some options, the Fuelab pumps I kan control with the autronic PWR output.
And they have a fuel pump that flow 700l/h.

Then I have the Magnfuel pumps, they have some fuel kits that I probably can use.
But there wasnt any flow charts on there web site..
Reply
Old Jan 29, 2010 | 09:24 AM
  #714  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway






Reply
Old Jan 29, 2010 | 09:32 AM
  #715  
TwinCharged RX7's Avatar
Built Not Bought
Tenured Member: 15 Years
Top Answer: 1
iTrader: (14)
 
Joined: May 2008
Posts: 4,389
Likes: 964
From: Stamford, CT
I love this car, but can't believe its not getting a turbo 20b.
Reply
Old Jan 29, 2010 | 09:35 AM
  #716  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Originally Posted by Chudsoncoupe
I love this car, but can't believe its not getting a turbo 20b.

That is because it wasnt supose to go as far as it has..


Was just going to tune the car to around 400bhp, and drive the **** out of it..
Reply
Old Jan 29, 2010 | 11:28 AM
  #717  
rx7plus8's Avatar
Full Member
Tenured Member 05 Years
 
Joined: May 2007
Posts: 97
Likes: 0
From: in a van down by the river
A-W-E-S-O-M-E! Build!
Reply
Old Jan 29, 2010 | 11:35 AM
  #718  
mrb63083's Avatar
Lives on the Forum
Tenured Member 20 Years
iTrader: (4)
 
Joined: Feb 2002
Posts: 5,748
Likes: 1
From: Dallas
Wow, what a beast! Nice, nice work!
Reply
Old Jan 29, 2010 | 11:59 AM
  #719  
Ceylon's Avatar
Non Runner
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2008
Posts: 2,211
Likes: 282
From: Somerset, England
Originally Posted by Chudsoncoupe
I love this car, but can't believe its not getting a turbo 20b.
An all out circuit car is better off as a 13b single tbh

Awesome build!
Reply
Old Jan 29, 2010 | 12:32 PM
  #720  
Force13B's Avatar
No more G6
Tenured Member: 20 Years
iTrader: (19)
 
Joined: May 2005
Posts: 1,935
Likes: 1
From: Nipomo, California
Originally Posted by vest_racing
Does anyone have any inputs on a mechanical fuel pump and FRP?

Need a fuel pump that can flow 700l/h at 8bar, and a frp that can handle that flow.

Have heard that the Aeromotive pumps are prone to leak after a short time.

Also need to handle E85 fuel..
That is a BUTT load of fuel
Originally Posted by vest_racing


[img]https://i24.photobucket.com/albums/c21/vest_racing/29%20Januar%202010/DSC_0649.jpg[/im]

[img]https://i24.photobucket.com/albums/c21/vest_racing/29%20Januar%202010/DSC_0647.jpg[/im]

[img]https://i24.photobucket.com/albums/c21/vest_racing/29%20Januar%202010/DSC_0646.jpg[/im]
I can't get over how sexy that dashboard is.
Reply
Old Jan 29, 2010 | 02:17 PM
  #721  
22GoinOn2's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jun 2004
Posts: 97
Likes: 0
From: Florida
You're going to hate that glossy dash when the sun hits it.
Reply
Old Jan 30, 2010 | 01:52 AM
  #722  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Originally Posted by 22GoinOn2
You're going to hate that glossy dash when the sun hits it.
No i wont..

Most of it will get covered with some fabrik, dont know if its called he same in the us.
But in norway it`s called flocking..



And thanx to the rest of u..
Reply
Old Jan 30, 2010 | 03:47 AM
  #723  
MrNizzles's Avatar
NizzleMania Productions
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2007
Posts: 686
Likes: 1
From: California
^ haha.. yah people do that to their x-mas trees, so what color you gonna flock it with?

http://www.craftflocking.com/index.php?pr=Multi_Packs
Reply
Old Jan 30, 2010 | 04:45 AM
  #724  
vest_racing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 567
Likes: 0
From: Norway
Originally Posted by MrNizzles
^ haha.. yah people do that to their x-mas trees, so what color you gonna flock it with?

http://www.craftflocking.com/index.php?pr=Multi_Packs
I`m going to use the black/gray color--
Reply
Old Feb 1, 2010 | 12:59 PM
  #725  
Force13B's Avatar
No more G6
Tenured Member: 20 Years
iTrader: (19)
 
Joined: May 2005
Posts: 1,935
Likes: 1
From: Nipomo, California
Originally Posted by MrNizzles
^ haha.. yah people do that to their x-mas trees, so what color you gonna flock it with?

http://www.craftflocking.com/index.php?pr=Multi_Packs
I'm sure this would look perfect on that nice dash board
Reply



All times are GMT -5. The time now is 03:18 AM.