Norwegian FD project.. lots of pics.
#226
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
It have one more bearing than the stock shaft has.
Meaning less flex, less clearance and the result is more Hp and higher rpm...
And it`s 2mm yes...
The seals are SCR seals, but will probably have to change them when I got the engine mapped..
#227
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
The plan is to enter an Extreme racing serie here in Norway and Sweden..
http://www.youtube.com/watch?v=Sqsd-5auVwE
http://www.youtube.com/watch?v=PBcCAxzdyJQ
#231
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Will not get any parts coated, but the rotors are polished..
She will get a good and wet wash when she`s painted..
#234
Environmentally-Hostile
Are you associated with the guy building the orange FB rx7? Both from Norway, and I believe you even have the same avatar "insane burnout." If thats the case, can we expect a full carbon fiber body like that car?
For those that might be wondering...
https://www.rx7club.com/showthread.p...ght=my+project
Sorry for the hijack, I was just curious.
For those that might be wondering...
https://www.rx7club.com/showthread.p...ght=my+project
Sorry for the hijack, I was just curious.
#235
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Are you associated with the guy building the orange FB rx7? Both from Norway, and I believe you even have the same avatar "insane burnout." If thats the case, can we expect a full carbon fiber body like that car?
For those that might be wondering...
https://www.rx7club.com/showthread.p...ght=my+project
Sorry for the hijack, I was just curious.
For those that might be wondering...
https://www.rx7club.com/showthread.p...ght=my+project
Sorry for the hijack, I was just curious.
That`s ok..
Yes I now about that car..
We liv in a very small contry..
So we probably now everyone how are in to rotary`s..
And yes I`m looking in to CF part`s for my car.
Mabye Roar, he how have the Fb in the pic will do the CF job for my.
#236
Environmentally-Hostile
Awesome. Don't know which car I like better! Single turbo 20b, or massive pp single turbo 13b? Both cars have been fabricated by masters! Keep up the awesome work, hope to see the finished product soon!
#237
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Thanx man..
I have a little plan for the car, but have to se how good I can get the traction on it...
#239
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
No, I will have a CF hatch with Lexan window in it.
But in Norway we have some rules that say.
That we have to have a liquid tight wall that parts the fuelcell and the coupe.
It`s for the racing licens purpose.
#240
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I`ve got a good deal on brakes for the car..
360mm x 32mm with 6 pot caliper in the front.
320mm x 32mm with 4 pot caliper in the rear.
Hope this will stop the car quickly when it`s needed..
And possible new wishbones on the car..
360mm x 32mm with 6 pot caliper in the front.
320mm x 32mm with 4 pot caliper in the rear.
Hope this will stop the car quickly when it`s needed..
And possible new wishbones on the car..
#241
I was also wondering, how come you decided to use a whole, completely running (assumably) FD for this job? you stripped it down anyway
I would have just got a shell and kept this car for you know driving on streets and such cruising
I would have just got a shell and kept this car for you know driving on streets and such cruising
#242
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Well the car is a Japan import, and in Norway we can`t use it on the road..
And second there arent many Fd`s here in Norway, so I couldn`t get a roller if I wanted to..
#247
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I will be doing a complete AtomicRex suspension..
Hispec brakes.
Nitron 3way adjustable coilovers.
AtomicRex manual steeringrack 2.4 truns from lock to lock.
They will be making a LHD rack for me, as they are located in UK..
AtomicRex wishbones.
Has been designed by the same man who made the suspension for the Mclaren SLR...
This will extend the width of the car with 60mm per side..
Hispec brakes.
Nitron 3way adjustable coilovers.
AtomicRex manual steeringrack 2.4 truns from lock to lock.
They will be making a LHD rack for me, as they are located in UK..
AtomicRex wishbones.
Has been designed by the same man who made the suspension for the Mclaren SLR...
This will extend the width of the car with 60mm per side..
#249
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Norway
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts