james81

Hi guys,
I'm busy making my stock twins run sequential, I was wondering if anybody knows where I can get hold of a vaccum diagram or any other helpful tips for the lines and actuators and hoses, etc. Any positive input is appreciated.
Thanks,
James81

Prophet7000

These are the ones that I used. One with MBC, one without. I used the MBC one, with one change. I didn't run the PCV valve, I just ran a vac line from the oil filler neck to the primary turbo inlet. If you haven't already seen it, the Tech section of the rotary ressurection website has a great full non-seq write-up. Goes through nice add-ons to the process (eg. wastegate porting etc)

P7k

james81

Thanks a million, that was exactly what I was looking for.

Prophet7000

You're welcome.