No fuel..No spark....No start
#1
Mhenkel23
Thread Starter
iTrader: (3)
Join Date: May 2010
Location: Knoxville
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
No fuel..No spark....No start
I've been working on my 93 roller for about a year getting it just how I want it. After wiring it all up I have no power to my fuel pump relay that located in front of the radiator and it seem as I have no spark b/c when I try to crank it the RPM's don't bounce on the gauge.
I was told to check the egi fuse or the CAS.. Does anyone else have any suggestions?
I'd like to finally start my car this weekend if possible
I was told to check the egi fuse or the CAS.. Does anyone else have any suggestions?
I'd like to finally start my car this weekend if possible
#2
Mhenkel23
Thread Starter
iTrader: (3)
Join Date: May 2010
Location: Knoxville
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Okay, I just verified that I am getting spark..
30A EGI fuse has good continuity
apparently the CAS is good
150A main fuse has good continuity
but still no power to the fuel pump relay in the front of engine bay..
This is my first Fd, and I'm at a loss on how to diagnose this, has anyone else had a similar issue?
It's probably something basic that happens alot, I just don't know.
30A EGI fuse has good continuity
apparently the CAS is good
150A main fuse has good continuity
but still no power to the fuel pump relay in the front of engine bay..
This is my first Fd, and I'm at a loss on how to diagnose this, has anyone else had a similar issue?
It's probably something basic that happens alot, I just don't know.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM