3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Nitrous Intercooler Sprayer

Thread Tools
 
Search this Thread
 
Old May 18, 2004 | 12:56 AM
  #26  
c00lduke's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 2,360
Likes: 0
From: Overland Park, KS
Yeah Emergency and things like staging lanes at the track. I was thinking of just spring at a stop thought but i gues it might be handy to be able to do while moving also.

~Luke
Reply
Old May 18, 2004 | 06:01 AM
  #27  
AntiVenom7's Avatar
Wouldn't Go If U Paid Me
Tenured Member 10 Years
 
Joined: Nov 2003
Posts: 3,036
Likes: 0
From: Clayton, NC
this is just one website that i pulled up quickly this morning. search under cry02, that is the name brand.

http://www.martelbrothers.com/customer/home.php?cat=456
Reply
Old May 18, 2004 | 11:00 AM
  #28  
KZ1's Avatar
KZ1
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 985
Likes: 0
From: Montreal, PQ


KIC K-522 Cooler Spec Shet

Hi Guys,

THe Kit is from KIC, should be available at the www.rx7store.net very soon. so keep a look out. I have attached some specs and photos just to get your mouths wet.

THe actual valve is different for Co2 and NOS, you haev to specify which one you want, you cannot interchange or it will leak.

It is not advisbale to spray nitrous anywhere around engine bay at WOT( sespecially for rotary), read the write-up it may give you some insight.

Last edited by KZ1; May 18, 2004 at 11:03 AM.
Reply
Old May 18, 2004 | 11:10 AM
  #29  
TwinTurbo93's Avatar
0-rotor-0-turbo-0-fd
Tenured Member 15 Years
 
Joined: Sep 2002
Posts: 1,640
Likes: 0
From: NYC
This is the cheapest kit I found so far
Reply
Old May 18, 2004 | 11:13 AM
  #30  
barkeep's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Oct 2002
Posts: 121
Likes: 0
From: ohio
KZ1... How much is that kit?
Reply
Old May 18, 2004 | 01:54 PM
  #31  
TwinTurbo93's Avatar
0-rotor-0-turbo-0-fd
Tenured Member 15 Years
 
Joined: Sep 2002
Posts: 1,640
Likes: 0
From: NYC
Originally posted by barkeep
KZ1... How much is that kit?
I bet it was over $ 300-350...
Reply
Old May 18, 2004 | 02:09 PM
  #32  
saxyman990's Avatar
Place your ad here...
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 1,336
Likes: 2
From: Dayton, OH
Just build your own. I built my own CO2 sprayer a year or so ago for less than $70 total (and I probably could have done it for cheaper than that). Thing works great! Course, now that I've changed my IC, I'm going to need to "upgrade" the sprayer...
Reply
Old May 18, 2004 | 02:17 PM
  #33  
RX-187's Avatar
live fast. die fun.
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,061
Likes: 0
From: USA
Originally posted by saxyman990
Just build your own. I built my own CO2 sprayer a year or so ago for less than $70 total (and I probably could have done it for cheaper than that). Thing works great! Course, now that I've changed my IC, I'm going to need to "upgrade" the sprayer...
I remember your post on this. You adapted it to the stock ic right?
Reply
Old May 18, 2004 | 02:21 PM
  #34  
skunks's Avatar
I'm a CF and poop smith
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 3,957
Likes: 1
From: Hawaii
Originally posted by saxyman990
Just build your own. I built my own CO2 sprayer a year or so ago for less than $70 total (and I probably could have done it for cheaper than that). Thing works great! Course, now that I've changed my IC, I'm going to need to "upgrade" the sprayer...

how did you make the hoop? did you just get some brake or other type of small pipe and just drill small holes into it at an angle?

also, how did you get the tank for so cheap? i just called up a local distributer and they said the tank alone would cost 110 bucks. is there a certine type of tank you are using?

as far as the paintball tank possiblity is concerned, how did you get a 5 lb bottle of that? my 20 oz CO2 bottle is freaken gianmorus and i dont think they sell anything bigger then that.

Last edited by skunks; May 18, 2004 at 02:33 PM.
Reply
Old May 18, 2004 | 02:47 PM
  #35  
TwinTurbo93's Avatar
0-rotor-0-turbo-0-fd
Tenured Member 15 Years
 
Joined: Sep 2002
Posts: 1,640
Likes: 0
From: NYC
What you think about this one it's 5 lbs, good price, but you'll need some hose and the sprayer hoop, you can also get a electric solenoid for cheap so you can spray with a swich
Reply
Old May 18, 2004 | 07:17 PM
  #36  
academytim's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 638
Likes: 1
From: Pace, FL
Pics as promised....




Reply
Old May 18, 2004 | 07:53 PM
  #37  
cloud9's Avatar
The bomb is in the toy!1!
Tenured Member: 20 Years
Loved
Community Favorite
Top Answer: 1
iTrader: (6)
 
Joined: Oct 2003
Posts: 2,229
Likes: 291
From: Dallas Tx.
KZ1, where did you get it from? Is necessary for the car to be "stopped" before this is used? Or could you be costing at a low speed (out of gear) and spray? Also how much does that particular kit you mentioned cost and how is the install?
Reply
Old May 18, 2004 | 08:08 PM
  #38  
teamstealth's Avatar
Ozone Depleter
Tenured Member 10 Years
 
Joined: Jul 2002
Posts: 1,610
Likes: 0
From: StL
it doesnt matter when or where you spray, since it has nothing to with the airflow INTO the engine. idle, WOT, coasting, spray whenever you please

academytim, that setup looks good! If it was my car id somehow find a way to wire it up to a relay and use a stock defroster switch, or a foglight switch as the on/off (i like the stock look )
Reply
Old May 18, 2004 | 08:11 PM
  #39  
teamstealth's Avatar
Ozone Depleter
Tenured Member 10 Years
 
Joined: Jul 2002
Posts: 1,610
Likes: 0
From: StL
Originally posted by saxyman990
Just build your own. I built my own CO2 sprayer a year or so ago for less than $70 total (and I probably could have done it for cheaper than that). Thing works great! Course, now that I've changed my IC, I'm going to need to "upgrade" the sprayer...
I'm having trouble finding a thread showing exactly what you built it out of, how you did it, etc. Care to provide us with a link or a writeup and pics?
Reply
Old May 18, 2004 | 10:19 PM
  #40  
saxyman990's Avatar
Place your ad here...
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 1,336
Likes: 2
From: Dayton, OH
Originally posted by RX-187
I remember your post on this. You adapted it to the stock ic right?
Yep. But like I said, I have since changed IC's. This is requiring me to rework the system slightly.

Originally posted by skunks
how did you make the hoop? did you just get some brake or other type of small pipe and just drill small holes into it at an angle?

also, how did you get the tank for so cheap? i just called up a local distributer and they said the tank alone would cost 110 bucks. is there a certine type of tank you are using?

as far as the paintball tank possiblity is concerned, how did you get a 5 lb bottle of that? my 20 oz CO2 bottle is freaken gianmorus and i dont think they sell anything bigger then that.
My first system didn't use a hoop (stock IC is too dinky). I just used a piece of aluminum tubing, drilled holes in it to spray (at upward and downward angles) onto IC, capped one end, and attached the other to the hose.

I just used a standard paintball tank. The first one I started using was like a 16oz, but I have since incorported a 20oz tank (both fit pretty easily behind my seat). One was bought used, the other purchased from a paintball store. Neither cost a lot of money (I think the one from the store was ~20). The CO2 actually lasts a lot longer than I originally expected them too (course, I really only spray short bursts. Just enough to knock the excess heat off).

Last edited by saxyman990; May 18, 2004 at 10:23 PM.
Reply
Old May 18, 2004 | 10:26 PM
  #41  
saxyman990's Avatar
Place your ad here...
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 1,336
Likes: 2
From: Dayton, OH
Originally posted by teamstealth
I'm having trouble finding a thread showing exactly what you built it out of, how you did it, etc. Care to provide us with a link or a writeup and pics?
I posted a lot more info in a few threads about 8-12 months back, but to be honest, I'm having trouble finding them too (plus this damn search function always times out on me). I'll see if I can find them for you guys though.

Unfortunately, I don't really have any pictures (no digi-cam). I'm currently in the process of a major overhaul of my engine/turbos. The new and improved sprayer is on my list of things to accomplish sometime next month. I'll make sure to take plenty of pics, and do a good write-up for you guys.

Rob
Reply
Old May 18, 2004 | 10:53 PM
  #42  
S-MAN's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 179
Likes: 0
From: Minnesota
all of u that say CO2 is just as effective, have not researched very carfully. CO2 spray on the intercooler is about a 20h gain Nitrous is about a 50h gain. To fill a 5lbs bottle of co2 it will cost about 20-30, depending on dealer. To fill the Nitous Express bott that is standerd, it cost about $40. that kit runs about $400, all of the co2 kits i have seen r around $150. U can find those kits on ebay or just go to your local performance shop and they can find it 4 u.
Question is whats more bang for the $. Depends on how power hungry u r.
Reply
Old May 18, 2004 | 10:57 PM
  #43  
S-MAN's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 179
Likes: 0
From: Minnesota
O, if u do choose the co2 rout, don't go with the big 5lb AL tank. They make 5lb compresed tanks made of fiber glass. Those tanks r about $300 but give a more constant spray. I have one that i need to get rid of since i just sold my paintball gun. If anyone wants to make an offer they r welcome to
Reply
Old May 18, 2004 | 11:00 PM
  #44  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
Originally posted by S-MAN
all of u that say CO2 is just as effective, have not researched very carfully. CO2 spray on the intercooler is about a 20h gain Nitrous is about a 50h gain.
Where and how do you get this? A 30hp increase that nitrouse would have to be insanly cold, and probably on an aftermarket IC.
Reply
Old May 18, 2004 | 11:04 PM
  #45  
academytim's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 638
Likes: 1
From: Pace, FL
The only reason you might see a higher gain from the nitrous kit is due to nitrous being sucked into your intake...as far as cooling agents, they are practically the same. As far as $30 bucks to fill a 5lb bottle...someone is ripping you off big time. I get mine filled for free...but it would only cost me $8 bucks if I had to pay for it.
Reply
Old May 18, 2004 | 11:07 PM
  #46  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
Originally posted by academytim
The only reason you might see a higher gain from the nitrous kit is due to nitrous being sucked into your intake...
To equate for 30 HP!? I mean your talking about two seprate feed lines one for the IC and one directly to your intakes.
Reply
Old May 18, 2004 | 11:12 PM
  #47  
academytim's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 638
Likes: 1
From: Pace, FL
First...let me say that I'm not the one who said nitrous gives you a 30hp gain. Second...let me say that I don't think it will give you a substantialy higher gain. Third...I don't know about you, but I'm not planning on having nitrous getting into my engine without being able to tune my fuel system for it. So the small gain you might see from using nitrous rather then co2 is not worth the risk of it blowing up my engine. Besides...I didn't install my kit to gain horsepower. I installed it to keep from "losing" horsepower due to heatsoak.
Reply
Old May 19, 2004 | 12:49 AM
  #48  
wReX's Avatar
Does not drive a WRX!!!
Tenured Member 20 Years
iTrader: (6)
 
Joined: Oct 2001
Posts: 1,253
Likes: 1
From: San Antonio
Cool

Originally posted by KZ1
THe Kit is from KIC, should be available at the www.rx7store.net very soon. so keep a look out. I have attached some specs and photos just to get your mouths wet.
Looks nice, and this should work perfectly. Any word on a price? Introductionary group buy?
Reply
Old May 19, 2004 | 01:03 AM
  #49  
cloud9's Avatar
The bomb is in the toy!1!
Tenured Member: 20 Years
Loved
Community Favorite
Top Answer: 1
iTrader: (6)
 
Joined: Oct 2003
Posts: 2,229
Likes: 291
From: Dallas Tx.
about how long does a tank (like the ones that have been pictured) last before you need to refill it?
Reply
Old May 19, 2004 | 01:30 AM
  #50  
Kevin T. Wyum's Avatar
None
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 1,318
Likes: 1
From: Minneapolis
Will rivets pop out of the dash if you use too much CO2?
Reply



All times are GMT -5. The time now is 06:02 PM.