Nice & Cheap PFC Commander Holder
#1
Nice & Cheap PFC Commander Holder
I was in BestBuy today and I found this car iPod holder. It's made by Bracketron and it was only $30. Cheaper than the Gotham Racing holder, and you can place it anywhere on the windshield. I wanted my PFC to be right in front of my face because I use it to monitor my engine temps (my gauge isn't working right now)...
Just wanted to share a few pics
Seems to be a pretty nice quality unit. The suction cup has a locking mechanism on it and the bendable arm is pretty sturdy. There are two different holders than snap onto the end of the arm - the big one (pictured) and a smaller one. The smaller one could be glued to the back of the PFC commander and you wouldn't even see it. Good deal for only $30!
Just wanted to share a few pics
Seems to be a pretty nice quality unit. The suction cup has a locking mechanism on it and the bendable arm is pretty sturdy. There are two different holders than snap onto the end of the arm - the big one (pictured) and a smaller one. The smaller one could be glued to the back of the PFC commander and you wouldn't even see it. Good deal for only $30!
#5
rotor rotor pow.
iTrader: (1)
there are a lot of pda / ipod / cell phone holders that would work. here's one for cig. lighter mounting http://www.newworldvideodirect.com/p...&refid=froogle
#7
there are a lot of pda / ipod / cell phone holders that would work. here's one for cig. lighter mounting http://www.newworldvideodirect.com/p...&refid=froogle
Trending Topics
#9
Full Member
iTrader: (1)
Join Date: Mar 2001
Location: South Jersey
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
i bought a cig-outlet cell phone holder from Target on clearance for about $2.00. Has worked great for the past few years. I think I did have to hack it up a bit since this particular one was a little long in the piece that sticks into the cig lighter, but you can't tell at all when you're looking at it and I can see the commander perfectly when driving.
#10
Glug Glug Glug Burp
Join Date: Jan 2002
Location: Scott AFB, IL
Posts: 3,819
Likes: 0
Received 0 Likes
on
0 Posts
Of course I spent a lot less time worrying about temps and pressures once I had a solid motor and tune... but just for entertainment:
https://www.rx7club.com/showthread.p...ommander+mount
I custom made it, but thought this was (if applicable) the best place to mount. Stays out of the 'way' so to speak.
Justin
https://www.rx7club.com/showthread.p...ommander+mount
I custom made it, but thought this was (if applicable) the best place to mount. Stays out of the 'way' so to speak.
Justin
#12
Rotary Enthusiast
Join Date: Nov 2002
Location: Oahu, Hawaii
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Of course I spent a lot less time worrying about temps and pressures once I had a solid motor and tune... but just for entertainment:
https://www.rx7club.com/showthread.p...ommander+mount
I custom made it, but thought this was (if applicable) the best place to mount. Stays out of the 'way' so to speak.
Justin
https://www.rx7club.com/showthread.p...ommander+mount
I custom made it, but thought this was (if applicable) the best place to mount. Stays out of the 'way' so to speak.
Justin