Newbie, needs help
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location: PA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Newbie, needs help
Just picked up a 93 touring, has a blown tranny, My problem is as im pulling off the tranny i cant seperate it from the engine, I can see the flywheel and half of the torque converter, but i cant seem to seperate it all the way
Am i missing a step>??
..Any suggestions would be great, thanks
Am i missing a step>??
..Any suggestions would be great, thanks
#2
Weird Cat Man
Is this on a 5 speed or an automatic? You mention "torque converter" implying that it's an auto... in which case, I have no clue... if it's a 5 speed, you need to release the pull-type clutch from the pressure plate first.
Brian
Brian
#3
1JZ powered
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Wargasm
Is this on a 5 speed or an automatic? You mention "torque converter" implying that it's an auto... in which case, I have no clue... if it's a 5 speed, you need to release the pull-type clutch from the pressure plate first.
Brian
Is this on a 5 speed or an automatic? You mention "torque converter" implying that it's an auto... in which case, I have no clue... if it's a 5 speed, you need to release the pull-type clutch from the pressure plate first.
Brian
Hey since I've got OS Giken clutch set that turns the pull type clutch into a push type clutch(so I have NO experience with pull type clutches)....How do you separate a pull type clutch from the PP?
Van
Thread
Thread Starter
Forum
Replies
Last Post