New engine idle/starting problems
Long post but I really need the help.
Let me explain my problem better. I have a power fc and modded fuel system with an aggressive street port. The turbos are non seq with many other mods.
I can start the car with the atf trick every time. I have only gotten it to start twice without the trick. The car starts and runs fine throughout all rpms. I found a water leak while doing this and fixed it. Car never overheats or anyother problems.
When I turn the key the car gets between 400 and 700 rpm and sounds like its about to fire off and then the starter dies out and the car doesn't start. The second try is always less rpm.
I have searched many posts already.
Let me explain my problem better. I have a power fc and modded fuel system with an aggressive street port. The turbos are non seq with many other mods.
I can start the car with the atf trick every time. I have only gotten it to start twice without the trick. The car starts and runs fine throughout all rpms. I found a water leak while doing this and fixed it. Car never overheats or anyother problems.
When I turn the key the car gets between 400 and 700 rpm and sounds like its about to fire off and then the starter dies out and the car doesn't start. The second try is always less rpm.
I have searched many posts already.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM



