need some clarification

Reply Subscribe

Thread Tools

Search this Thread

Mar 17, 2005 | 08:46 PM

Quadulus

Thread Starter

Full Member

Joined: May 2004

Posts: 220

Likes: 0

From: MN

need some clarification

Ok, so I've been looking for a vac hose diagram and came upon this one.. the simplified one.

Do I need to install blockoff plates if I go this route? What kind of obstacles would I run into?

My car is stock.

Attached Thumbnails

Mar 17, 2005 | 08:55 PM

rynberg

Lives on the Forum

Joined: Dec 2001

Posts: 14,716

Likes: 10

From: San Lorenzo, California

If you remove those items with a stock ecu, you will get a CEL unless you install resistors for everything you remove. The car will not run properly without them.

Mar 18, 2005 | 06:14 AM

Quadulus

Thread Starter

Full Member

Joined: May 2004

Posts: 220

Likes: 0

From: MN

np, what ohm resistors would I need to wire in?

Mar 18, 2005 | 07:40 AM

Mahjik

Mr. Links

iTrader: (1)

Joined: Aug 2001

Posts: 27,595

Likes: 43

From: Kansas City, MO

Quote:

Originally Posted by Quadulus

np, what ohm resistors would I need to wire in?

330 ohm, 1/2 watt.

Mar 18, 2005 | 04:51 PM

dr. drift

Dr. Drift

Joined: Oct 2004

Posts: 137

Likes: 0

From: Nation's Capital

what if you have a PFC, going single turbo, can you remove everything? Newbie.

Mar 18, 2005 | 08:42 PM

maxcooper

WWFSMD

Joined: Jun 2001

Posts: 5,035

Likes: 4

From: SoCal

You can pretty much remove all that stuff with a single turbo and PowerFC. I think someone posted a simplified diagram for single turbo setups in the single turbo section -- you might want to consult that for details. The PowerFC doesn't care that the solenoids are missing, so you don't have to install resistors.

-Max