need some clarification
03-17-05, 08:46 PM
#1
Full Member
Thread Starter
Join Date: May 2004
Location: MN
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
need some clarification
Ok, so I've been looking for a vac hose diagram and came upon this one.. the simplified one.
Do I need to install blockoff plates if I go this route? What kind of obstacles would I run into?
My car is stock.
Do I need to install blockoff plates if I go this route? What kind of obstacles would I run into?
My car is stock.
03-17-05, 08:55 PM
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
If you remove those items with a stock ecu, you will get a CEL unless you install resistors for everything you remove. The car will not run properly without them.
03-18-05, 08:42 PM
#6
You can pretty much remove all that stuff with a single turbo and PowerFC. I think someone posted a simplified diagram for single turbo setups in the single turbo section -- you might want to consult that for details. The PowerFC doesn't care that the solenoids are missing, so you don't have to install resistors.
-Max
-Max
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
jkallio
2nd Generation Specific (1986-1992)
7
07-14-05 08:55 PM