need help with wiper problem....
#1
need help with wiper problem....
hi team,
i recently reassembled my dash plastics after i painted them. everything was 100% normal before but now...
i dont have a low wiper setting anymore! ive only got the medium and hi settings.
happened to anybody b-4, does help with this problem exist?
thanks, rajeev
i recently reassembled my dash plastics after i painted them. everything was 100% normal before but now...
i dont have a low wiper setting anymore! ive only got the medium and hi settings.
happened to anybody b-4, does help with this problem exist?
thanks, rajeev
#4
My problem may be similar.My wiper wouldn't stop at the bottom, i had to manually stop it at the bottom. Also the wiper wouldn't work in int. or high setting, only normal. After looking at my passengers side wiring harness, i noticed some wires had been cut. My wiring harness got cut by the headlight motor squeezing the wires, and eventually cutting them. Check the harness from the wiper motor, and follow it all the way to the front of the car to under the pass. headlight assembly. Last thing i could suggest is try swapping your wiper motor. I belive it's three/four bolts attaching it to the firewall, and then there's one nut that connects to the arm.
Thread
Thread Starter
Forum
Replies
Last Post