Need Help With Stock Duct And Smic
#1
127,338 OEM, 11.5psi
Thread Starter
Join Date: Jun 2005
Location: MARYLAND
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Need Help With Stock Duct And Smic
hey guys I wanted to know something, is the stock duct really needed when using a aftermarket SMIC? I have a ARC race spec IC and its about 1 1/2 inch taller and 1 1/2 wider but is still SMIC. I have seen the Blitz and Greddy SMIC set up, and they come with a top cover plate . so my ? is do i need the full duct or can i just use that top cover plate like the vendors sale? and before i forget, with the V-mount do you use the stock duct work and if not how would i channel that air? thanks for your help guys.
#2
No Paypal Accepted!
You are looking at running 15 degree C and higher if you don't use a duct. Even if the stock duct only covers 3/4 of your current IC use it until you can find or make a custom duct.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM