ok im installing an aftermarket upper charge pipe (the piece that comes right off the TB, has 4 bolts and A vac line going to it in the back) in my TT rx-7.
There is no hole for the VAC line in the aftermarket one. What does that vac line go to.... Should i plug it or keep it open. I mean i don't want it blow up because my ecu is not reading boost or something and im not gettin enough fuel.
HELP

 

you mean the plastic elbow?

 

plug it, its the aws

 

should he plug it AND the hose that suppose to go on there?

 

your really suppose to take off the UIM and plug it from the bottom of it.

 

Wow, that is some serious ****. I am glad it was resolved so quickly. You car might have blown up.



Next time search, this is covered 10 times a week.

 

just another paranoid dirver, one of many on this site, can't blame him for wanting to take care of his car as fast as he can.

 

http://www.maxcooper.com/rx7/parts_i...l#GReddy_Elbow

 

yeah im a turbo honda guy, a new motor for my civic is 400 bucks, not so for my brand new rx-7 motor. I had no idea what that hose was for. What if it read boost pressure wise ***? And i started boosting but my ecu didn't know it? then boom I blew my motor cause it ran lean and detonated. I'm no newb to turbos, just new to rx-7's, so dont flame me because i don't want to ruin my expensive new motor. Thankyou cloud9 and to those that helped, its my only car and have to drive it in the morning. Go **** yourself famanchu.

 

I will be installing a greddy elbow soon, and was wondering if there is a gasket between the elbow and tb? If their is should it be replaced?

 

Thanks kid. Next time search. You would of turned up 100 threads in 1 min.



OMG!!@! mY INteRiOR lIGhtS doN't WorK

 

You are new here so this is just a friendly warning: That statement is a NO NO. If you have a problem with someone, take it to Private Messages or talk to a Moderator.