3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need help. Need pics

Old Mar 2, 2004 | 03:14 PM
  #1  
LS1Z's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: California
Need help. Need pics

Ok i know this is off topic but i posted before in the interior/exterior section with no results.

I'm looking for a few pic of the interior of a 93 up RX-7.
I'm looking for the following shots:

1. Trunk
2. Dash board (like where the radio goes)
3. The compartment behind the rear seat and a
measurement of that compartment.
4. A few shots of the seats folded foward so that i can
look at how much space is behind the rear seats.

If anyone can e-mail me these pics i'd really appreciate it. Sparo2@aol.com

I'm going to be installing a computer PC system into a 94 RX7 R1 with a 7" monitor up front where the radio goes. Something like the G-net system.
Reply
Old Mar 2, 2004 | 03:19 PM
  #2  
Sprockett's Avatar
Former Rotorhead
Tenured Member 05 Years
 
Joined: May 2002
Posts: 1,926
Likes: 0
From: Midland, MI
You should install the GU-net system....GOT SHOT NINE TIME$$$!!
Reply
Old Mar 2, 2004 | 03:19 PM
  #3  
Full Member
Tenured Member 05 Years
 
Joined: May 2003
Posts: 55
Likes: 0
From: buffalo, new york
why do you want a computer in your race car?
Reply
Old Mar 2, 2004 | 07:36 PM
  #4  
LS1Z's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: California
Well, off that computer the following programs and audio systems will be controlled:

Complete sound system
Windows XP
Autotap
Fuel management
PCM tuner
GPS
DVD

Not bad for an additional 5 pounds of weight. All these components will be controlled from the touch screen on the deck.

Can someone please send me some pics or direct me in the right direction.
Reply
Old Mar 2, 2004 | 07:59 PM
  #5  
DCrosby's Avatar
No it's not Turbo'd
Tenured Member 20 Years
 
Joined: Jun 2002
Posts: 2,511
Likes: 2
From: Los Angeles, Ca
Why do you need pics, go to your FD and take some pictures, and do some measurements....

Unless you don't have an FD, in which case you have much bigger issues than the Car-Puter...

Besides if you were doing this right you'd look up an Via Epia 10000 MB and a 12v-12v regulator which will fit in your glove compartment, or behind the 7" LCD... and you'll have issues with getting radio going unless you keep the head unit @ which point where are you putting the touchscreen where it doesn't obstruct the vents, controlls or your vision ??? With the stock headunit, do you know the pinouts, or are you using an FM Modulator ??

Sounds like you haven't thought this through....

Last edited by DCrosby; Mar 2, 2004 at 08:04 PM.
Reply
Old Mar 2, 2004 | 08:41 PM
  #6  
ijneb's Avatar
FOR SALE
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 738
Likes: 0
From: Central Florida
Yea, what he said.
www.google.com search images.
Reply
Old Mar 2, 2004 | 09:19 PM
  #7  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
https://www.rx7club.com/showthread.p...hreadid=257818
Reply
Old Mar 2, 2004 | 10:06 PM
  #8  
LS1Z's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: California
DCrosby,

If i had an FD i wouldn't be on this forum asking about pics of the interior now would i?

Actually i have everything worked out, power supply, relays, wiring and so forth. The only reason why i need some measurements and pics is because i want to know how much space i have to work with. I would hate to make everything and not have it fit.

The car will have the following:

2 Fosgate Amps
1 Fosgate capacitor
2 10" bass tubes with JL Audio W6's
High's are not determined yet
Alpine 7" monitor w/ touch screen
Alpine EQ
My own in car PC w/ G-net Digital Dash software.

I think it's pretty much all worked out.

Does anyone have any pics
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SSpyderX
How to use this Site
15
Oct 2, 2015 10:07 PM
acha3
2nd Generation Specific (1986-1992)
7
Sep 6, 2015 08:14 AM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:03 PM.