need advice, bad wooshing sound
#1
Full Member
Thread Starter
Join Date: Aug 2003
Location: Dallas, Tx
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
need advice, bad wooshing sound
So i'v had my fd for a few weeks now, but havent had much time to drive it recently. I took it out for a spin tonight, but found that when I get into boost it starts to make a strange wooshing sound (around 5psi). also I don't think it was boosting all the way, although i didnt push it after i started hearing the sound so it may be. I took a glance under the hood, but didn't notice anything blindingly obvious. I didn't have time to deal with it tonight but am gona try to check it out tomorrow when I have some time. I was hoping someone might be able to give me some ideas to narrow down my search, or at least some good places to start
Cheers,
Dale
Cheers,
Dale
#3
Full Member
Thread Starter
Join Date: Aug 2003
Location: Dallas, Tx
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Yea, I was just a little worried about going WOT til redline with strange happenings under the hood. It used to hit almost 11 psi, tonight, I went to at least 4500 a few times and never saw over 9 psi, bit I'l start their tomorrow
Thanks
Thanks
#4
Senior Member
Join Date: Apr 2004
Location: Sydney Australia
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
Try checking the hose and coupling at the Y pipe and cross over pipe. I solved my 2 year boost leak mystery with the same distinct whooshing sound by doing this.
#5
Urban Combat Vet
iTrader: (16)
Originally Posted by YOUWSH
Try checking the hose and coupling at the Y pipe and cross over pipe. I solved my 2 year boost leak mystery with the same distinct whooshing sound by doing this.
#7
Full Member
Thread Starter
Join Date: Aug 2003
Location: Dallas, Tx
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Right on. The coupling that goes to the IC intake pipe had a crack I could put a finger through. I think its safe to assuem thats it, now I just gota find a new one.
Thanks
Thanks
Trending Topics
#8
Urban Combat Vet
iTrader: (16)
Originally Posted by izanami
Right on. The coupling that goes to the IC intake pipe had a crack I could put a finger through. I think its safe to assuem thats it, now I just gota find a new one.
Thanks
Thanks
Can't remember for sure but I THINK 2. 75" is what you need.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM
83revival
New Member RX-7 Technical
4
09-03-15 10:42 PM