krid23

Putting an intake back together on a 94 Touring and need 2 injector connectors. The old ones work but don't click in. Anyone know where I can find these? I tried Ray Crowe already, he doesn't have them.

DaleClark

iTrader: (55)

https://lms-efi-llc.myshopify.com/co...ctor-connector

Really you can get it, pull the pins from the existing plug, and pop the pins into the new plastic plug. Much easier than trying to crimp new pins on and everything. I've done that many times fixing engine harnesses.

There are other sources out there too, that's just the first I found searching around. You can also hit up the junkyard, I've found a pocketful of those connectors at the pick and pull before. 4-cylinder engines have the injectors up high and you can get right to them.

Dale

Sgtblue

iTrader: (16)

https://rotaryperformance.com/produc...-set-89-95-rx7

krid23

Same thing here from Amazon?

Sgtblue

iTrader: (16)

Maybe not. One is mil-spec, waterproof and quality color coded wire. Couldn’t find that in the other description.
Price and cost…two different things

Shizat

iTrader: (22)

Try this site. They have almost every connector needed for the FD and others.
I got New injector connectors from them in the past. They are made by Sumitomo Japan. Filter your search by # of wires and look through, their inventory is extensive.

www.bmotorsports.com
Drew.

Sgtblue

iTrader: (16)

I can’t comment in the injector pig-tails that Shizat linked to, but I bought that set from Rotary Performance about 15 years ago during a rebuild b/c my originals were pretty stiff and crispy. Absolutely no issues over a lot miles since. And as deep as they are, and as critical as they are I wasn’t looking for deals.

krid23

I ended up getting these ones from Amazon and they worked great.