My very simplified sequential vacuum diagram
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Monteral, QC
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
My very simplified sequential vacuum diagram
This is the setup I'm currently using, I don't think I've seen anyone else using or posting this so I thought I would share.
This is for people running premix with all emissions removed, double throttle and pcv valve deleted.
Also the Turbo precontrol and wastegate control solenoids are removed in order to use 2 individual boost controllers where the restrictor pills used to be. IMO It's best to have as few solenoids as possible down there.
If you want to do this and use stock boost, you will need boost controlers with very very soft springs.
I based the diagram on someone else's diagram but I can't remember who it was, so I guess I'm sorry for not giving the credit
and I know I've done a terrible job with paint
This is for people running premix with all emissions removed, double throttle and pcv valve deleted.
Also the Turbo precontrol and wastegate control solenoids are removed in order to use 2 individual boost controllers where the restrictor pills used to be. IMO It's best to have as few solenoids as possible down there.
If you want to do this and use stock boost, you will need boost controlers with very very soft springs.
I based the diagram on someone else's diagram but I can't remember who it was, so I guess I'm sorry for not giving the credit
and I know I've done a terrible job with paint
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM