My horns SUCK
#1
VIP - Very Irish Person
Thread Starter
Join Date: Jan 2002
Location: NC State
Posts: 1,458
Likes: 0
Received 0 Likes
on
0 Posts
My horns SUCK
I got to thinking about this a lot last night when I had a couple *** holes pull out in front of me. Why is it that the horns on our FD's royaly suck. I mean... I have had two 3rd gens that have done this so I know it couldn't just be my luck. Its to the point where I can tap the brakes while holding down the horn and it will SIGNIFICANTLY change pitches when the lights come on. Also, since we have 2 different horns each at a different pitches I most often only hear one of them. Every know and then both will come on. They will also increase strength with the rpms... they sound perfectly normal when going anything above 45mph. Anybody else suffer from this? and does anybody else have a solution?
#3
RX-7 Bad Ass
iTrader: (55)
Time to upgrade the horns . I had air horns in my '88 T2 - sounds just like horns on a Ferrari or something. Biggest advantage was they were VERY loud and got attention VERY fast. You get some quick responses when you lean on 'em!
You can get cheap Fiamm ones at Pep Boys for like $20-30 or so.
Dale
You can get cheap Fiamm ones at Pep Boys for like $20-30 or so.
Dale
#6
Rotary Freak
Join Date: Dec 2001
Location: chandler, AZ
Posts: 2,402
Likes: 0
Received 0 Likes
on
0 Posts
I totally agree about the horns, and all my friends make fun of how ***** they sound. Yesterday, some older lady totally jacked me, I honked and she freakin stuck her tounge out at me. I wanna horn that will really let these jack holes have it!
#7
VIP - Very Irish Person
Thread Starter
Join Date: Jan 2002
Location: NC State
Posts: 1,458
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking about the HELLA horns that I've seen sold at a few places. They're like $100 though. I want something that will make 'em jump.
Trending Topics
#12
VIP - Very Irish Person
Thread Starter
Join Date: Jan 2002
Location: NC State
Posts: 1,458
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yodaddy
that's exactly why i spelled it that way, good job, you get a gold star.
SWEEEEET!
Would it be better to just run two completely new lines to two new horns? Actually, i can't imagine running a line back to the steering wheel... can somebody find out where it would be best to splice into for some new ones. It seems obvious that it shouldn't be done at the stock horns.
#13
Still on 1st engine
Join Date: Jun 2003
Location: SoCal
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Just splice at the horn relay. You shouldn't have to screw with the steering wheel.
While you're at it, you might consider running better grounds or maybe a dedicated + feed, especially if you're upgrading.
While you're at it, you might consider running better grounds or maybe a dedicated + feed, especially if you're upgrading.
Last edited by InsaneGideon; 08-13-04 at 08:40 PM.
#17
RX-7 Bad Ass
iTrader: (55)
Actually, most horns wire straight to battery or switched power with a relay - the stock horn lead just switches the relay on.
I know air horns need a good supply of current. They actually have a small air compressor that blows air through the horns. Air horns are CRAZY loud - I really dig the sound!
Dale
I know air horns need a good supply of current. They actually have a small air compressor that blows air through the horns. Air horns are CRAZY loud - I really dig the sound!
Dale
#18
*******
iTrader: (9)
Join Date: Dec 2001
Location: NJ
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
i use the horn alot. i like to honk at people on the side of the road, especially girls that look good. but like some of you, one of my horns stopped workin awhile back and now it sound so weak. im embarrased to even use it unless its an emergency. and then it probably wouldnt be heard. definately need to upgrade.
steve
steve
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM