my custom v-mount pics
#108
almost done
Thread Starter
Join Date: Dec 2001
Location: 250 HZ
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
^
?
BackyardSog- i never tried to re-install the plastic undertray so im not sure if it still fits but it would block the flow of the fans if it did fit.
?
BackyardSog- i never tried to re-install the plastic undertray so im not sure if it still fits but it would block the flow of the fans if it did fit.
#109
I've just done a custom V mount on mine, took it for its first drive since the rebuild and the inlet temps were 11degs and water temp at 87degs.
I havn't made any sheet metal ducting for the sides of the V yet so temps should fall even more once i do it.
I used a standard griffin rad and ebay IC which was re welded.
I havn't made any sheet metal ducting for the sides of the V yet so temps should fall even more once i do it.
I used a standard griffin rad and ebay IC which was re welded.
#113
almost done
Thread Starter
Join Date: Dec 2001
Location: 250 HZ
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
^
^ what dimensions?
thanks guys, i'm selling my v-mount setup soon to another forum member (currently M.I.A)
so i will be making a new one soon with different IC core, IC angle(maybe), IC routing and some crazy IC/hood ducting, hopefully you guys like the new setup, i plan on building a few v-mount kits to sell to help me purchase a new welder (miller syncrowave 250dx, damm thats one bad-*** machine!) so let me know if you are interested.
^ what dimensions?
thanks guys, i'm selling my v-mount setup soon to another forum member (currently M.I.A)
so i will be making a new one soon with different IC core, IC angle(maybe), IC routing and some crazy IC/hood ducting, hopefully you guys like the new setup, i plan on building a few v-mount kits to sell to help me purchase a new welder (miller syncrowave 250dx, damm thats one bad-*** machine!) so let me know if you are interested.
#115
I Love Cookies!
Join Date: Jan 2007
Location: E. Montpelier, VT
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
nice....so both of the rad hoses are modified to flow into then out of the top of the rad?? there both in the top end tank in this setup?(no longer top to bottom)
aluminum work is flaless
Drew
aluminum work is flaless
Drew
#116
almost done
Thread Starter
Join Date: Dec 2001
Location: 250 HZ
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
thanks fellas , i did a search looking for the picture of the radiator inlet to show someone and noticed this thread was recently back from dead, all the v-mount threads seem to re-surface every few months.
#124
Senior Member
Join Date: Aug 2008
Location: campbell river british columbia
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
hey kinetik,
i am currently building the same vmount as you with the same brackets and i was curious if i could have the measurements for the pieces that hold the rad? it would be greatly appreciated pm me because your inbox is full
thanks in advance
i am currently building the same vmount as you with the same brackets and i was curious if i could have the measurements for the pieces that hold the rad? it would be greatly appreciated pm me because your inbox is full
thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM