My costs so far on the auto to manual conversion!
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: FL
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
My costs so far on the auto to manual conversion!
I'm finally done buying parts for my 93 auto to manual conversion. This is what i spent on parts with shipping included.
*Tranny - $555 its a 95 with 33,000 miles and 90 day warranty
*driveshaft - $97
*4.1 diff rear end - $255
*93 5 speed ECU - $60
*Guage cluster,brake and clutch pedal,master and slave cylinder,hard pipe - $200
*New ACT Street/strip clutch and 9.5lbs flywheel- $900
*Mazdatrix short shifter - $218
Total =$2285
There is also bolts i'm gonna have to buy along with rear main seal and o ring
And i have to supply diff fluid and tranny fluid,brake fluid
Now installation is gonna be close to thousand.I'm having used struts with 30,000 installed at the same time.I'll keep you posted on the labor hours and cost.
*Tranny - $555 its a 95 with 33,000 miles and 90 day warranty
*driveshaft - $97
*4.1 diff rear end - $255
*93 5 speed ECU - $60
*Guage cluster,brake and clutch pedal,master and slave cylinder,hard pipe - $200
*New ACT Street/strip clutch and 9.5lbs flywheel- $900
*Mazdatrix short shifter - $218
Total =$2285
There is also bolts i'm gonna have to buy along with rear main seal and o ring
And i have to supply diff fluid and tranny fluid,brake fluid
Now installation is gonna be close to thousand.I'm having used struts with 30,000 installed at the same time.I'll keep you posted on the labor hours and cost.
Thread
Thread Starter
Forum
Replies
Last Post