Need some pictures of Tranny part of wiring harness....
Thread Starter
Lawn Ornament
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
Need some pictures of Tranny part of wiring harness....
With all the engine being replaced(including) mine, I figured i would finally get soem pictures of the wiring harness and reqire my Auto harness to wire directly up to the manual tranny. The Wiring manual is not much help, but if someone could snap qutie a few good quality pics of the manula tranny part of the harness i would really appreciate it... I would need some of both ends the part that plugs into the engine harness, and the parts that plug into the 1-2, neutral, reverse, and speed sensor... THANKS!
Eric MacKenzie
Eric MacKenzie
Rotary Enthusiast
Joined: Apr 2002
Posts: 917
Likes: 1
From: SC
I will be doing the same except using the manual harness to integrate to the auto dash harness. At lunch today I went under and recorded all the wire colors coming from each coonector by the tranny. I left the list at home for luch cause I planned to just tie in under the dash to the "other" white connector.
So far this is what I know. There are four connectors in that area:
furthest to the rear end is the 1-2 switch consists of four wires.
next the back up light 2 wires
then the neutral switch 2 wires
then I believe is the speed sensor...2 wires
totals 10 wires that can be connected. damnit wish I would have brought the wire color list to work!
So far this is what I know. There are four connectors in that area:
furthest to the rear end is the 1-2 switch consists of four wires.
next the back up light 2 wires
then the neutral switch 2 wires
then I believe is the speed sensor...2 wires
totals 10 wires that can be connected. damnit wish I would have brought the wire color list to work!
Thread Starter
Lawn Ornament
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
lol cover8 that would be really helpful, i have been driving around with no neutral, 1-2, or backup switch, for 5K miles. I have the engine and tranny out right now, and would love to finalize this conversion. Plus i would love to get a write up done on just the wiring harness, since most people can't afford to buy a manual harness. Thanks!!
Thread Starter
Lawn Ornament
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
Originally posted by alwan16
i could get some pics up tonight since my engine/tranny are out if you can wait that long....
alex
i could get some pics up tonight since my engine/tranny are out if you can wait that long....
alex
Rotary Enthusiast
Joined: Apr 2002
Posts: 917
Likes: 1
From: SC
harnes coloration
ok working from the rear of tranny towards the front.
rearmost on the tranny shifter area is the 1-2 switch...mine is a 1993
1-2 switch 4 wires...for the 1 switch (yellow) and (white)...for the 2 switch (red) and (blue)
next si the back up light 2 wires (yellow w/red stripe) and (green w/yellow stripe)
next is the nuetral switch 2 wires (light green) and (brown)
next and closest to front on this row fo switches is the speed sensor (green w/silver spots) and ( orange)
rearmost on the tranny shifter area is the 1-2 switch...mine is a 1993
1-2 switch 4 wires...for the 1 switch (yellow) and (white)...for the 2 switch (red) and (blue)
next si the back up light 2 wires (yellow w/red stripe) and (green w/yellow stripe)
next is the nuetral switch 2 wires (light green) and (brown)
next and closest to front on this row fo switches is the speed sensor (green w/silver spots) and ( orange)
