Just wondering what you guys who have the FEED skirts used to mount them? Any imput will be appreciated.

thanks guys,
-josh

 

I used double side tape and the back of the car theres that black stock side skirt looking thing, Take that out and use the stock srews.There sould be two.In front I used the bolt from the fender. So all together there 3 srews and about 4 feet of double side tape on each side holding it up.

 

As said above, I used the 2 screws in the rear that went to the factroy aero piece in front of the rear wheel, and in front I used the 2 bottom fender screws. In the center, I drilled and placed 2 rivits evenly spaced between. Tight as can be If you have the RE Feed copies there are small circular indentations where to drill in the skirt that line up to these factory holes.

 

thanks fellas!

 

i used 6 self tapping screws per side

 

^ Same here just 6 self tapping screws on each side