I was just wondering how many of you guys were using a simple manual boost controller and what brand. Pictures or write-ups would be good too.

Thanks,

Andrew

 

https://www.rx7club.com/3rd-gen-archives-73/my-boost-control-setup-perfect-10-8-10-pattern-178136/

 

I am using the setup described in the linked thread and it works great. I would definitely recommend it!

 

Turbosmart MBC here

http://www.turbosmart.com.au/

Works like a champ.

 

Sorry, I should have mentioned non-sequential.

 

No one has pics/write-up for a manual boost controller with non-sequential twins?!!!What is this world coming to?

 

Again, Turbosmart ;p

 

Cap one nipple on the turbo pipe. Then run vac hose from the second nipple off the turbo pipe. Run that to the "in" side of the boost controller. Then run a hose from the "out" side of the boost controller to the passenger side nipple on the wastedate actuator. Then cap the second nipple on the wastegate actuator. DONE.