Manual conversion starter wiring
#1
Facilitator of Disorder
Thread Starter
iTrader: (4)
Join Date: Dec 2020
Location: Allentown PA/ Three Mile Island
Posts: 277
Received 152 Likes
on
96 Posts
Manual conversion starter wiring
Greetings all,
I'm currently nearing the end of my manual conversion and I am using the manual engine harness with the automatic dash, front ring, and battery harness. What I am having some difficulty with is the manual starter to the auto battery harness. It seems that many who have done the conversion have retained the auto rear iron and starter, but I cannot find much information on whether I will need to jumper from the ignition switch to the starter or if there is a better way to do it with the auto battery harness or just replace with its manual counterpart?
Any advice would be greatly appreciated!
I'm currently nearing the end of my manual conversion and I am using the manual engine harness with the automatic dash, front ring, and battery harness. What I am having some difficulty with is the manual starter to the auto battery harness. It seems that many who have done the conversion have retained the auto rear iron and starter, but I cannot find much information on whether I will need to jumper from the ignition switch to the starter or if there is a better way to do it with the auto battery harness or just replace with its manual counterpart?
Any advice would be greatly appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
3
04-14-13 11:00 PM