jpandes

This a dumb question. But, does M2 "label" or make any attempt at putting a logo on the stock ECU once they stick a new chip in it?

Just curious, I just bought a used one.

Also, will I "feel" any difference once I swap out the stock ECU? It's not that don't trust the guy on the forum who sold it to me. I just want to make sure that my engine doesn't grenade by leaning out by running a non-modded ecu...

SaltyDog12

I bought a used on too.. Mine came with "M2 Stage III" handwritten in permanent marker. I can only assume it is correct as i didn't take it apart to check it.

jpandes

How can I tell if it has actually been remapped?

rx7speed811

somebody said if you open it up there are extra chipsets soldered on to the board, but i wouldnt know what it looks like. if i did i would help you out, i live right down the block

jpandes

Rx7speed,

We should hook up. I just started really getting into modding my car and sure could use some moral & Technical support. Working on these damn cars is intimidating as hell! Have you thought about doing SOLOII racing? I want to check it out.

~ John

rx7speed811

my car is sitting in my garage right now, ive been working on it for a damn month now, just taking care of stuff i needed to get around to for a long time. i agree, these cars are intimidating as hell to work on.

we met before, do you remember me? i have the other silver fd in the marina that passed you on francisco st a few months ago. i have some pretty big plans for my car to be done by the end of the summer, no money though we should hook up some time.

Wargasm

Hey I used to have an M2 Stage 3 ECU. I opened it up once and inside were several PROMs with "M2 Performance MM-##" or something like that on it. You could check it out for yourself.

Brian