M2 ECU Questions
01-27-07, 01:38 PM
#26
MenWithGutsAttackCorners!
Join Date: Nov 2006
Location: bristol tn
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
on the link in the first post it says M2 dont provide reflash for automatic trannys but people have told me they used a stage 3 ecu in an automatic FD so were they lieing to just to get me to buy it or will it work on an automatic ? info would be appreciated so i can decide if i can buy one or not , aslo would a power fc base map be jsut as good as the m2 reflash or would the PFC need to be tuned to be as efficent ?
01-27-07, 03:07 PM
#27
Senior Member
Originally Posted by vtakk eg
on the link in the first post it says M2 dont provide reflash for automatic trannys but people have told me they used a stage 3 ecu in an automatic FD so were they lieing to just to get me to buy it or will it work on an automatic ? info would be appreciated so i can decide if i can buy one or not , aslo would a power fc base map be jsut as good as the m2 reflash or would the PFC need to be tuned to be as efficent ?
i don't know for sure, but from what I have read....they are pretty similar. The maps are flexible and CONSERVATIVE.
01-27-07, 06:03 PM
#28
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,835
Received 2,604 Likes
on
1,847 Posts
Originally Posted by vtakk eg
on the link in the first post it says M2 dont provide reflash for automatic trannys but people have told me they used a stage 3 ecu in an automatic FD so were they lieing to just to get me to buy it or will it work on an automatic ? info would be appreciated so i can decide if i can buy one or not , aslo would a power fc base map be jsut as good as the m2 reflash or would the PFC need to be tuned to be as efficent ?
01-27-07, 06:36 PM
#29
I have this ECU with Ebay DP, STOCK CAT, RB dual CB, M2 Aluminum Intake, M2 Large SMIC and KS EBSIII Boost controller. I took it to the dyno and these were the results:
250whp at 8~9psi 11.1-11.5 afr (from a tailpipe sniffer)
315whp at 13.5psi leaning to 12.5 afr towards redline
Stock fuel system.
I have since replaced the cat with a metal high flow and the fuel pump with a walbro but haven't dynoed with the new mods yet.
250whp at 8~9psi 11.1-11.5 afr (from a tailpipe sniffer)
315whp at 13.5psi leaning to 12.5 afr towards redline
Stock fuel system.
I have since replaced the cat with a metal high flow and the fuel pump with a walbro but haven't dynoed with the new mods yet.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM