Hello,
i´m looking for the best intercooler without relocating the battery.
I´m searching the hole web and only i found the medium from M2,but i read here in this Forum M2 was not able to sell these IC Kit for now.They lost the selling rights....... so bad for me , i have a new rebuild engine , new oilcooler , new radiator and hope new intake System from rx7trix(alsow an M2 product)but no IC.
Can any help needed so please reply me shortly....
Thanks Ray

 

Try www.petitracing.com
BLITZ FMIC but you have to get a smaller battery.

 

Yes, M2 lost the rights to sell that core. However, they are now being sold under the old name ASP. You might check with the RX-7Store to see if they have any in stock.

As far as other IC's, you might also look into the PFS SMIC:

 

It is also a good idea to run a smaller battery tray if your running a bigger that stock SMIC.

Click here for some pics. Saves 10lbs over stock and prevents the battery from rubbing on the IC.

http://community.webshots.com/album/57282344QSRTye

PM me for details.

 

Also Check out Rotary Extreme's VMount, it requires smaller battery and airbox, but no relocation, and gets you more IC Exposure than SMIC and no Radiator loss as with FMIC....

http://www.rotaryextreme.com

 

@ evot23 thanks but i have not a dayily driven car and an small one would be loosing its charge to fast.
And an Front mount gives colling problems..

 

@ Mahjik
I have had that crispy IC from Peter Farell ,i have sell them. loosing cooling force with the Intake system and the serice was terrible....
And i have ask RX7 store they couldn´t get me an s/h Price to germany and they have wright in this Forum that he hasn´t the medium one jet. In the Future ...?????

 

@ DCrosby
i think alsow that this System is the best ever , but the same problems with the small battery at an non daily drivencar.
When you spin your car like in you little picture , you have many problems when the battery is in the car(sulfur acid ).

 

Jason at the RX7 Store will have some medium Intercoolers available very soon. In fact everything but the tubing is sitting in front of me for 3 kits. I'm not sure how many of those are already spoken for though.

Kevin T. Wyum

 

you linked to a bunch of popups

http://www.pettitracing.com/

 

Ray,

Consider using a small IC like mine (Blitz SMIC) or Greddy SMIC and use water injection.

I run around with lower than ambient temps, its pretty cool (pardon the pun). You get better cooling than a front mount and less lag, lower pressure drop than stock, etc. cost is also cheap (850 for IC, 150 for water injection).

 

Consider relocating your battery. Its win win, You get a better battery, better traction, better cornering, The battery lasts longer (forever) because it doesnt get hot.
I used an Optima 51 R in the bin with no cutting. EZ

http://cgi.ebay.com/ws/eBayISAPI.dll...tem=3045463697

 

also consider if you relocate it, you cant go to any track event unless you put a cut off valve in the back of your car on the outside. PIA if you ask me.