location of tach wiring or the signal behind the odo
#1
Rotary Freak
Thread Starter
Join Date: Mar 2003
Location: GLENDALE, CA
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
location of tach wiring or the signal behind the odo
ok, so my tach hasnt been working for quiet a while now.. and i have not really tired to fix it.. so i wanted to know what wire is for the tach signal?? its only the guage that is not working. i check the signal from the diagnostics port and it reads.. and the pfc commander reads also....
if anyone knows which plug or which wire on which plug, please let me know!!
also, i have swapped clusters and its the same thing.. everything works except the rpm...
Thanks!
if anyone knows which plug or which wire on which plug, please let me know!!
also, i have swapped clusters and its the same thing.. everything works except the rpm...
Thanks!
#2
dont remember the color but its the 3rd pin from the top right of the middle connector.
- -
- -
- - --TAM <- tach wire
- -
- -
- -
- -
- -
- - --TAM <- tach wire
- -
- -
- -
Last edited by KINETIK_FD3S; 04-12-05 at 08:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM