Okay so me and MakoDHardie are getting an order together for the Rx-7 store, anyway.....here is the list of parts i am purchasing.
-Efini badges (i just like them)
-Redline MTL fluid (for differential)
-Hyper ground system (i know i can make my own just don't feel like it)
-Greddy pulley kit
-JIC stainless steel exhaust.
-Vaccume hose kit
-Cusco front strut bar
-M2 trailing arms
-magnecor wires
-greddy turbo timer

please feel free to list any other parts that you feel are necessary, or may help the install process.

 

What are the mods you already have?

 

I would not use Redline MTL for the differential. MTL is for the transmission (MTL = Manual Transmission Lube). The Redline 75W90 would probably be the best choice for the diff (see Redline 75W90).
Dave

 

If you are doing the vac hose job. You might as well replace the fuel pulsation dampner and maybe send your injectors out to be cleaned and balanced.

 

the only mod i have as of now is a petit DP a Petit AST, and a B & M short shifter. Rated R1, that dosen't sound like a bad idea. How much does it cost? Dave Mc thanks for the reminder, lol i remember reading that now.

 

Well you don't have boost gauge or downpipe listed, so if you don't have those I would suggest them. Also, I would say the turbo timer isn't really necessary...

 

You should get:
Intercooler
Radiator
Y-pipe
Intake
Fuel computer
New Wheels
New Gauges
New exhaust

Did I forget anything?

 

THe FPD is ~$130-$150 and I think it costs about two fitty to do the injectors.

 

thats not too bad for the injectors, I forgot to mention i have a efini Y pipe (not installed) Feed torque brace (not installed) a boost gauge, EGT gauge, and water temp gauge (not installed yet) I plan on getting a new ECU, intercooler and radiator. That is probally going to be my next step after this order. Unless i decide to get coil overs and wheels next.

 

intake piping

 

While doing the vac hoses, might want to send the injectors out for cleaning.
Eric