3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

a little help with my fd

Thread Tools
 
Search this Thread
 
Old 07-07-07, 10:40 AM
  #1  
Sir Braps A lot

Thread Starter
 
rx7rcer09's Avatar
 
Join Date: Jul 2006
Location: Hilliard, OHIO
Posts: 2,001
Likes: 0
Received 1 Like on 1 Post
a little help with my fd

so im going to buy this fd for sure on monday and im driving it and at idel it sounds like it wants to die and when you floor it it hits the fuel cut and sounds like its going to die but it has a PFC, and all supporting fuel mods i think the plugs are bad and need a change car sat all winter with same fuel in it and didnt get started anyways if some one could give some advice on what to do im takeing it to the rx7 store on monday to get it tuned hopefully that will fix it
Old 07-07-07, 04:06 PM
  #2  
Full Member
 
paradoxbox's Avatar
 
Join Date: May 2007
Location: Vancouver/Yokohama
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
you didn't use a single period in your entire post, yet you managed to insert a lone comma.

could you please edit your post and make it a little easier to understand what you're trying to ask??????
Old 07-07-07, 04:20 PM
  #3  
registered user

iTrader: (1)
 
car hugger's Avatar
 
Join Date: Mar 2005
Location: Fort Lauderdale, FL
Posts: 421
Likes: 0
Received 0 Likes on 0 Posts
Don't floor/ boost the car with old fuel.

Changing the plugs, siphoning out the old fuel and putting in a few gallons of fresh fuel should help if that's whats wrong with the car.

Have you gotten a compression test done? Don't commit to buying it until you've done at least that.
Old 07-07-07, 05:36 PM
  #4  
Sir Braps A lot

Thread Starter
 
rx7rcer09's Avatar
 
Join Date: Jul 2006
Location: Hilliard, OHIO
Posts: 2,001
Likes: 0
Received 1 Like on 1 Post
the motor is fine it runs great. and had a fresh rebuild 2 years ago and less than 5,000 miles on it but ill get it checked for sure
Old 07-08-07, 05:46 PM
  #5  
Sir Braps A lot

Thread Starter
 
rx7rcer09's Avatar
 
Join Date: Jul 2006
Location: Hilliard, OHIO
Posts: 2,001
Likes: 0
Received 1 Like on 1 Post
ok went and test drove it everything works except the spedo it only goes up to 20mph and the car runs a little hot not over heating or anything what do you guys think the problem could be with. the spedo i think its a sensor
Old 07-08-07, 09:59 PM
  #6  
4 rotor 964 lol

iTrader: (1)
 
s-thetikz's Avatar
 
Join Date: Sep 2003
Location: SoCA/ MA
Posts: 1,170
Likes: 0
Received 0 Likes on 0 Posts
read the FAQ
Old 07-08-07, 11:27 PM
  #7  
What's your point ?

 
CantGoStraight's Avatar
 
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rx7rcer09
ok went and test drove it everything works except the spedo it only goes up to 20mph and the car runs a little hot not over heating or anything what do you guys think the problem could be with. the spedo i think its a sensor
Since you know nothing about these cars how do you know it's running "a little hot" IIRC the PFC also reads speed, Does it read correctly and the speedo does not or do they both read the same thing ? If they both read the same I'd suspect the speed sensor in the tranny.
Old 07-09-07, 09:40 AM
  #8  
Sir Braps A lot

Thread Starter
 
rx7rcer09's Avatar
 
Join Date: Jul 2006
Location: Hilliard, OHIO
Posts: 2,001
Likes: 0
Received 1 Like on 1 Post
i know a lot about fds it has a pfc. but no controller and the spedo only goes up to 20mph and stops its weird it worked a couple mounth ago ive tried to buy this car. 4 times and always missing it by a few days and i talked to jason at the rx7store. he said it probly is a speed senson and need more coolent.




All times are GMT -5. The time now is 10:28 AM.