Knight Sports V-Mount Installation Write-Up
#6
There are lots of web sites that will convert a web page to PDF, e.g., http://pdfcrowd.com/. I will probably add more details to this write-up over the next week so I would not generate a PDF until you are ready to use it.
I thought about making a template with measurements for the ducting but the tolerances are simply too tight so the project ended up being well beyond my drafting skills. The approach of using a cardboard section and cutting to fit works well - and the resulting ducting will likely fit best with whatever bumper configuration that you have. Even with what I though was an accurate cardboard template, I made dozens of minor modifications to the aluminum panel during fitting. This is trial-and-error work with lots of cut hands and cursing.
I thought about making a template with measurements for the ducting but the tolerances are simply too tight so the project ended up being well beyond my drafting skills. The approach of using a cardboard section and cutting to fit works well - and the resulting ducting will likely fit best with whatever bumper configuration that you have. Even with what I though was an accurate cardboard template, I made dozens of minor modifications to the aluminum panel during fitting. This is trial-and-error work with lots of cut hands and cursing.
#12
Rotary Enthusiast
iTrader: (33)
oh and one more thing. Whoever wants to save this guide into a PDF just do the following (on Windows PC):
1. Mouse right click on the page
2. From the drop down menu select "Print..."
3. On the print setup screen find "Destination" and press "Change..."
4. Select "Save as PDF" and press "Save"
5. Save the PDF file wherever you want
1. Mouse right click on the page
2. From the drop down menu select "Print..."
3. On the print setup screen find "Destination" and press "Change..."
4. Select "Save as PDF" and press "Save"
5. Save the PDF file wherever you want
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM