Hey guys i just got a brand new KAAZ LSD and im wondering about somthing. How much does it lock? Is it a 100% LSD or a 90% when it comes from KAAZ. I know there are ways to change it to difrent lvl's but i don't want to take it out again.

So if anyone knows, please let me know.

JT

 

SCC did a thing with a 1.5 LSD they got for their 350Z project (to replace that shitty VLSD) and it locked up way too much stock.

They had to disassemble it and put the clutch plates together alternating somewhat the wrong way so that the lockup came out to be... a little less than 50%, I forgot.

Its in the project car section of their website under 350Z. Its going to take some tuning to get it streetable, but it shouldnt be too hard to do.

 

Its 100 percent locking from kaaz.

 

it is adjustable from 33, 66, and 100%

 

The new one is adjustable to 20, 40, 60, 80 and 100%

 

So at 100 it is a spool actually?

 

So the new one is 100% locking?

Hmm i cant use that for track racing. I need to adjust it.

Can anyone tell me how to do it. Is there a manual on the net that says how to do it?

JT

 

i'm in the same boat. how do i make this act better for the road course events?

 

http://www.sportcompactcarweb.com/p...08scc_proj350z/

http://www.sportcompactcarweb.com/r.../0405scc_nismo/

http://www.driftfactory.com/lsdinstall.php

 

The first two links aren't.

 

my bad! how come i can't edit my posts?
here are the links that work:

http://www.sportcompactcarweb.com/ro...0405scc_nismo/

http://www.sportcompactcarweb.com/pr...8scc_proj350z/

 

Not it either.

Need one that says how to change the locking from 100% to 80%

100% on acceleration is not good when track driving. It's good for drifting but.

JT

 

I have these instructions on how to...but I cant down size to load here with out them getting out of focus.If someone can resize so it can be posted here I will email.

 

That picture is way to small to be able to read any thing from it.

Impossible to rezise cause it's fucked upp, when it was shrunk.

 

email it to me and i can edit and host:
scott @ ponycars.net

remove the spaces above.