mazda/feed

hey people well i took out the airpump and put in the greddy pulley set and what i did also i swapped out the apexi intakes i took out the long according rubber pipes and just hooked up the intake that has everthing going to the airpump to the now short pipe but now i have a really bad ideal problem it hunts and i dont know why can somone help me

Enconsiderate

its because you removed your airpump. you have to increase your idle by a little.

mazda/feed

HOW DO I INCREASE MY IDEAL BY A LIL THANK YOU

mazda/feed

ANDIS IT EASY TO DO

lopedl

iTrader: (1)

Does the idle increase because of removing it from the belt, or because the airpump is not connected to the cat, just curious from anyone who has done the mod.

Hyperite

Idles goes to **** with the airpump removed whether you have a cat, a midpipe, or no exhaust at all. IF your only problem is LOW idle (which I highly doubt), you can turn the idle screw under the elbow on the throttle body.

rzograbian

wait, so what your saying is if you have no cat's and remove your airpump, you will will have bad idle no matter what??? i highly doubt that!

mazda/feed

well im going to try and adjust this screw and see what happends thanks guys now if i adjust this would my ideal go back to normal like it was before i took out the airpump?

rzograbian

btw, its idle not ideal

Mahjik

iTrader: (1)

Unless you have a programmable ECU, you have to use the idle screw adjustments to raise the idle with a stock or rechipped ECU when removing the airpump.

wickedrx7

iTrader: (14)

FYI- Running a cat with no airpump will shorten the life of you cat immensely. You should really only remove the airpump if you have a midpipe.

mazda/feed

THANKS FOR THE SPELL CHECK (

Hyperite

Oh, cool, thanks for the heads up! Not like I've done it or anything