just installed konis
#1
just installed konis
i just installed my koni yellows tonight. i bought them used with stock springs (supposedly about 15k miles on them) assembled and ready to go on.
after installing, i went on the maiden voyage and everything was great. the ride is much more responsive and tighter feeling, but not more harsh. i used the middle spring seat on the front shocks and the lowest spring seat on the rear shocks. will post up a couple pictures later
two thumbs up
after installing, i went on the maiden voyage and everything was great. the ride is much more responsive and tighter feeling, but not more harsh. i used the middle spring seat on the front shocks and the lowest spring seat on the rear shocks. will post up a couple pictures later
two thumbs up
#3
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
With stock springs you should be ok, but if eventually go with lowering springs....run the highest perch up front. Otherwise you'll rub a hole through your fender liner.....
#5
Senior Member
Join Date: Feb 2005
Location: All Over NJ...
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
when i changed my springs and shocks for the first time, it made the biggest difference in handling, then later i added along strut bars, and sway bars, it just keeps getting better and better.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM