Jacobs fc1000 install
11-25-05, 01:48 AM
#1
7th heaven
Thread Starter
Jacobs fc1000 install
Trying to install the FC1000. Now the Jacobs white wire goes to coil wire (Yellow/Blue +), Jacobs Black wire to coil (Black/Red -), Jacobs Red wire to ignitor wire (Light green/ Black). Can anyone verify this? Am I missing any connections? Oh...green wire to???
Last edited by Bad_Karma7; 11-25-05 at 01:51 AM.
11-25-05, 08:02 AM
#2
black to blue/yellow coil
white to black/red coil
red to black/red wire off stock harness
green to yellow/blue wire off stock harness
Heavy red to power
heavy black to ground
brown is an optional tach wire.
I got this from someone on the forum here, good luck
white to black/red coil
red to black/red wire off stock harness
green to yellow/blue wire off stock harness
Heavy red to power
heavy black to ground
brown is an optional tach wire.
I got this from someone on the forum here, good luck
11-25-05, 11:37 AM
#3
7th heaven
Thread Starter
Thanks for you help, HAI-TEK7. I'm looking at the wiring diagram...there's no yellow/blue wire going to ignitor. There's a Black/white, you think he could have meant that one? It also looks like there is a black/red wire coming from each coil and is connected...so that is the ground, that one should be hooked to negative right? I appreciate any help you can give me.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
