rjuge

Help... clueless, i've got the blue energy pak, these are the available wires:

one set of black and red (i'm assuming batt. and grnd). They have a little harness.., then I've got two more harnesses, one with green and white wires and one with red and black wires.

Any ideas?

platinumblack

large red and black are battery.
on the wires going into the leading coil,[2 wires,should be black/red and yellow/blue],cut the wires so now you have one set going to the coil and one set from fd harness.

black/red from fd harness goes to small red of jacobs
yellow/blue from fd harness goes to small green of jacobs
black from jacobs goes to yellow/blue of coil
white from jacobs goes to black/red of coil
-splice wires together with butt connectors & heat shrink

btw,do you have an ultra coil?i used stock.
post how it runs afterwards.i ran my car for about a month with it,thought power was down so i removed it and it seemed to run better without it.i honestly feel i got ripped off.