intercooler
08-15-06, 10:04 PM
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: suffern, ny
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
intercooler
i really need an intercooler but dont know which one to go with. i would like one that i can use with the stock turbos and for a single conversion. any help would be appreciated
08-15-06, 10:36 PM
#2
Obvisously, there is a piping difference between a single turbo and the stock twins. Your best bet is to look in the single turbo section to see what people are using in those setups. Then, see how hard it would be to adopt it to the stock twin setup on a temporary basis.
08-15-06, 11:07 PM
#3
Full Member
Thread Starter
Join Date: Aug 2006
Location: suffern, ny
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mahjik
Obvisously, there is a piping difference between a single turbo and the stock twins. Your best bet is to look in the single turbo section to see what people are using in those setups. Then, see how hard it would be to adopt it to the stock twin setup on a temporary basis.
there is no kit that has the piping for both?
08-15-06, 11:18 PM
#4
Original Gangster/Rotary!
iTrader: (213)
I love my ASP Large stock mount intercooler. Minimal pressure drop and boost lag, and doesnt block the radiator like fmic's do. Will work fine with a single turbo setup, just need to adapt the one pipe from the compressor to the intercooler. PM kevin t. wyum here on the forum, he sells them.
08-15-06, 11:19 PM
#5
Senior Member
Join Date: Jul 2005
Location: Clearwater, FL
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
They have kits with options for both. You may be able to order the piping for both. The turbo side would mount completely different. The intake side should be more or less the same.
08-15-06, 11:54 PM
#6
Full Member
Thread Starter
Join Date: Aug 2006
Location: suffern, ny
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoodfellaFD3S
I love my ASP Large stock mount intercooler. Minimal pressure drop and boost lag, and doesnt block the radiator like fmic's do. Will work fine with a single turbo setup, just need to adapt the one pipe from the compressor to the intercooler. PM kevin t. wyum here on the forum, he sells them.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM
MILOS7
3rd Generation Specific (1993-2002)
0
09-18-15 03:39 PM
Devon300zx
2nd Generation Specific (1986-1992)
3
09-17-15 03:50 PM