Installing Profec spec II question
#1
Rotary Enthusiast
Thread Starter
Installing Profec spec II question
Hey everyone, on the boost control device, which two holes do you use for teh wastegate control?
ITs not the COM one I dont think, but which of the other two goes to the actuator?
Steve
ITs not the COM one I dont think, but which of the other two goes to the actuator?
Steve
#2
Rotary Enthusiast
Thread Starter
Also, where did u connect the power from? the ashtray doesnt seem to want to power my buds.
Also it didnt come with instructions =\ . What is that clear double nipple thing? some sort of grommet/
Also it didnt come with instructions =\ . What is that clear double nipple thing? some sort of grommet/
#5
Hope this helps http://www.roadraceengineering.com/greddy_profecb2.htm
Trending Topics
#8
Senior Member
iTrader: (1)
Join Date: Sep 2001
Location: SE MI
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
hey i installed this awhile ago....i had a manual that explained everything pretty clearly though. i'd take a look at it but it's packed away somewhere since i'm moving.
give greddy a call and they'll walk you through it.
or just wait a few days till i unpack some stuff and i can tell ya then
give greddy a call and they'll walk you through it.
or just wait a few days till i unpack some stuff and i can tell ya then
#9
Lives on the Forum
Originally posted by Rx-7$4$me
We cant seem to get the unit to power up, we have it connected to the ash tray light, why wont it power?
We cant seem to get the unit to power up, we have it connected to the ash tray light, why wont it power?
#10
Rotary Enthusiast
Thread Starter
YEah we were just trying to get it to turn on though, and it looks like we got a defective unit, as even when we connected it to teh battery it still failed to turn on.
Everything else we installed correclty, just no power.
Everything else we installed correclty, just no power.
#11
Slave2TheFD
Join Date: Mar 2001
Location: Nevada City, CA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
The ashtray light is on the dimmer circuit which uses weird pulses to control the amount of light so it's not a good idea to hook stuff up there.
Can anyone recomend a good acc power point, I need to hook my profec up to something besides straight to the batt...
thanx
Can anyone recomend a good acc power point, I need to hook my profec up to something besides straight to the batt...
thanx
#13
Full Member
Join Date: May 2002
Location: Irvine, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
On the valve unit, use COM and NO. Connect the hose from the primary turbo nipple to the NO port. Connect the other hose from the COM port into the actuator. Cap off the other hose from the actuator that goes to the stock solenoid.
I just installed mine yesterday, works fine except a bug with the warning feature.
I used one hose from the turbo housing, capped the other nipple on the housing, into the NO port. I then used the COM port and a brass tee to go to both pre-control and wastegate actuators and capped both that go to the stock solenoids.
For the wire and hose, I drilled a hole in the firewall on the passenger side.
If you need pics lemme know I'll go take some. Hope this helps.
I just installed mine yesterday, works fine except a bug with the warning feature.
I used one hose from the turbo housing, capped the other nipple on the housing, into the NO port. I then used the COM port and a brass tee to go to both pre-control and wastegate actuators and capped both that go to the stock solenoids.
For the wire and hose, I drilled a hole in the firewall on the passenger side.
If you need pics lemme know I'll go take some. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM